06-21-2011, 07:11 PM | #1 |
Second Lieutenant
30
Rep 223
Posts |
Xenon fog light installation help.
Bought a Philips xenon kit (bulbs and ballasts) to replace fogs. After installing I got errors that bulbs were out and light would flicker. I know I can hardener the resister to the battery (power supply) but was wondering ifthere is another workaround for this? I don't want to hardwire to the battery or jump point for power. Suggestions?
|
06-22-2011, 12:09 PM | #3 |
Second Lieutenant
30
Rep 223
Posts |
Thats not the problem I'm referring to. Even manually the flicker and error messages on dash. I was told I need a relay harness with direct power from battery. I'm looking for a harness that does not need a power source, but still solves the problem.
|
Appreciate
0
|
06-22-2011, 01:51 PM | #5 |
Second Lieutenant
30
Rep 223
Posts |
Do you have an additional harness? Or just bulb straight to ballast? If you DO have an extra harness, which one do you have?
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|