[Autobahn SoCal]

Anyone know what this option is? It’s on my M2 order and not quite sure what that means.

[DomMuc]

https://g87.bimmerpost.com/forums/sh...14&postcount=4

its decoded cause in some states it´s not legal... you can activate no dazzle Highbeam with Bimmercode

[1stM]

This guy coded on his G80.

[cmgbk75]

How Anti-Dazzle looks in fog.

[M2siast]

Originally Posted by DomMuc

https://g87.bimmerpost.com/forums/sh...14&postcount=4

its decoded cause in some states it´s not legal... you can activate no dazzle Highbeam with Bimmercode

I don’t think you can code it with Bimmercode. I’d be happy to learn how to if possible, but it’s not right now.

[M2siast]

Originally Posted by cmgbk75

How Anti-Dazzle looks in fog.

Are those the high beams on?

[cmgbk75]

Originally Posted by M2siast

Are those the high beams on?

Come on Canada! Yes, of course.

[M2siast]

Originally Posted by cmgbk75

Come on Canada! Yes, of course.

I’m just jealous.

[Chet for short]

https://g87.bimmerpost.com/forums/sh...6#post30369922

Vid shows how to code for no-dazzle. Also goes through all other bimmercode settings.

[M2siast]

Originally Posted by Chet for short

https://g87.bimmerpost.com/forums/sh...6#post30369922

Vid shows how to code for no-dazzle. Also goes through all other bimmercode settings.

That is a different car though. I mean for the G87 it can’t be done.

[GregW / Oregon]

Originally Posted by M2siast

That is a different car though. I mean for the G87 it can’t be done.

From Bimmercode:

"Hi,

thanks for getting back to us - we are working on compatibility for the G87 but cannot promise a timeline yet.
--
Kind regards / Schöne Grüße
Sven Straubinger - Lead Developer
--
SG Software GmbH & Co. KG
Linsenäcker 18/1, 72379 Hechingen

Amtsgericht Stuttgart HRA 735678, Sitz: Hechingen
Persönlich haftende Gesellschafterin: SG Software Verwaltungs-GmbH
Amtsgericht Stuttgart HRB 769559, Sitz: Hechingen
Geschäftsführer: Stephan Gauch"

[cmgbk75]

Originally Posted by M2siast

That is a different car though. I mean for the G87 it can’t be done.

It’ll work for our car.

Side note, I drove about 60 miles late last night with cars sometimes front and oncoming cars and the Auto High Beams stayed on the entire time. It’s really cool watching the beam dance around the cars.

[M2siast]

Originally Posted by cmgbk75

It’ll work for our car.

Side note, I drove about 60 miles late last night with cars sometimes front and oncoming cars and the Auto High Beams stayed on the entire time. It’s really cool watching the beam dance around the cars.

So you coded yours? Can you share screenshots of the advanced options you changed?

[cmgbk75]

Originally Posted by M2siast

So you coded yours? Can you share screenshots of the advanced options you changed?

Not this guy but he follows the same coding and it definitely works. It’s not complicated and takes less than 10 minutes.

[cmgbk75]

Originally Posted by M2siast

So you coded yours? Can you share screenshots of the advanced options you changed?

You’ll need two devices to do it. One with the instructions or screenshots (snap them from the video is probably the quickest. He posts the code. Example attached) and one connected to Bimmercode.

[M2siast]

Originally Posted by cmgbk75

Not this guy but he follows the same coding and it definitely works. It’s not complicated and takes less than 10 minutes.

Originally Posted by cmgbk75

You’ll need two devices to do it. One with the instructions or screenshots (snap them from the video is probably the quickest. He posts the code. Example attached) and one connected to Bimmercode.

I get it, but that’s a different car. I’m asking if you coded or if you can share your codes so I can compare.

[cmgbk75]

Originally Posted by M2siast

I get it, but that’s a different car. I’m asking if you coded or if you can share your codes so I can compare.

And I’m telling you it will work in our car. Just log in as a G20 in Bimmercode.

[M2siast]

Originally Posted by cmgbk75

And I’m telling you it will work in our car. Just log in as a G20 in Bimmercode.

Ok I’ll try that then. I was just skeptic because Bimmercode says they don’t support it…

[cmgbk75]

Originally Posted by M2siast

Ok I’ll try that then. I was just skeptic because Bimmercode says they don’t support it…

I hear you but they’ve said that about all the coding we’ve done so far. I promise you it’ll work. Just go slow. You have to use Expert mode.

[M2siast]

Originally Posted by cmgbk75

I hear you but they’ve said that about all the coding we’ve done so far. I promise you it’ll work. Just go slow. You have to use Expert mode.

This is reassuring and exciting! I’ll do it and post back! Thanks man

[GregW / Oregon]

Originally Posted by cmgbk75

And I’m telling you it will work in our car. Just log in as a G20 in Bimmercode.

You log in as G20 instead of G82, or does it matter?

[cmgbk75]

Originally Posted by GregW / Oregon

You log in as G20 instead of G82, or does it matter?

I’ve used both G20 and G80 searching for more functionality, same results.