[Pekingduck]

I put some H&R springs on my m3 with 13mm spacer rear and 10mm spacer front.

Before after getting tint with no spacers




After with spacer and springs

The car initially had a neutral handling and after spring install it has a slight under steer on turn in. With current spacer it did run once on a 3 point turn. Springs are quiet and no new new noise.

[M3-san]

Looks good but it's very hard to see the gap with the black paint. How are the gaps front and rear? I'm thinking of going the H&R route as well.

And more importantly, how is the ride?

[Vic55]

As suspected, the specific for the G80 with H&R really gets the front down right but the rear (for me) is too high.

I do love the G80 in black!!!

[Pekingduck]

Originally Posted by M3-san

Looks good but it's very hard to see the gap with the black paint. How are the gaps front and rear? I'm thinking of going the H&R route as well.

And more importantly, how is the ride?

This is my wife’s car so I am not familiar with it, but she said the suspension slightly stiffer. I do notice when I drove before it was a very neutral handling but now I do feel slight under steer on turn in. I would look more like oem aftermarket

[Vic55]

Originally Posted by Pekingduck

This is my wife’s car so I am not familiar with it, but she said the suspension slightly stiffer. I do notice when I drove before it was a very neutral handling but now I do feel slight under steer on turn in. I would look more like oem aftermarket

Yep, thats due to the front end drop...

Can you post a few close ups of the front and rear wheels too?

[mzcp]

Originally Posted by Pekingduck

This is my wife’s car so I am not familiar with it, but she said the suspension slightly stiffer. I do notice when I drove before it was a very neutral handling but now I do feel slight under steer on turn in. I would look more like oem aftermarket

We have seen a couple stock alignments that were off by a lot. Maybe check your alignment