[Rocko123]

Hey guys just thought I'd share this.. So my fan blower in my E90 3 series stopped working for some reason one day to the next.. the electrical controls worked fine but it wasn't blowing heat out. What happens is that its a fairly common issue with older E90's the weather stripping on the lower part of the windshield starts to separate and water goes into the cabin/foot well area of the car and directly on top of the HVAC system. Since this was my second time fixing the problem I figured I'd show you guys a temporary fix IF your problem was that the blower seized from rust. Again this is just a temporary fix that'll get you by as long as your car doesn't get rained on everyday

Ps. The 5w30 oil is probably a bit thick so if you want to use something else more suitable for the job feel free lol

[lnxguy]

Great DIY. Graphite lube is probably what you'd want to use.

[Rocko123]

Originally Posted by lnxguy

Great DIY. Graphite lube is probably what you'd want to use.

My man. Thanks for the tip!

[lnxguy]

Originally Posted by Rocko123

My man. Thanks for the tip!

No worries, my blower motor is doing the same thing (Although I can stick my fingers in from the engine compartment and at least spin the motor by hand)