07-20-2018, 08:24 AM | #2 |
First Lieutenant
55
Rep 337
Posts
Drives: 2010 X6 M
Join Date: Apr 2018
Location: 6ix Side
|
same here....might have to get one on ebay
|
Appreciate
0
|
07-23-2018, 09:01 AM | #6 |
First Lieutenant
55
Rep 337
Posts
Drives: 2010 X6 M
Join Date: Apr 2018
Location: 6ix Side
|
|
Appreciate
0
|
07-27-2018, 09:06 AM | #7 | |
M Master
74
Rep 551
Posts |
It the one everyone has.. However I didnt install it because I dont like how the design circles in the air dam area.. this lessens airflow which im not a fan of.. I cut the top half of mine off and am attempting to find a body shop that will mold the cut section against my bumper.. If im able to make this happen ill post a final pic, otherwise if anyone comes up or finds another spoiler solution please post!
Quote:
__________________
M History: E46 M3, E92 M3, E63 M6, F13 M6 Comp Pkg, E71 X6M
|
|
Appreciate
0
|
07-27-2018, 10:49 AM | #8 | |
First Lieutenant
55
Rep 337
Posts
Drives: 2010 X6 M
Join Date: Apr 2018
Location: 6ix Side
|
Quote:
|
|
Appreciate
0
|
07-27-2018, 11:45 AM | #9 |
Brigadier General
2040
Rep 3,044
Posts
Drives: 2022 BMW X5
Join Date: Nov 2013
Location: Boston
|
I had both and I like the M-Performance much better! (personal preference)
the Vorsteiner or Vorsteiner replica is ok and will work for many as replica sells for about $400 then its a luck of the draw, some fit well others not so much! I was somewhat lucky with mine, but having it for a year or so I got tired of it and decided to get M-Performance Now this is very expensive purchase especially knowing the placement of the lip. It needs to be prep well before installing which I honestly didn't do but so far so good As far as replica goes, yes u won't be able to find replica for this lip on eBay or Ali, I ran across few places (overseas) where they could do the replica for this lip but places were somewhat questionable and I already installed mine. Its recommended to use betalink adhesive to install it which I did and its a permanent solution so to find one used is impossible unless it was never installed but then price won't be that different from the online shops. Last but not least I covered the lower bumper portion of my car with CF tape to mach the spoiler's cf and now it looks better IMHO as visually it looks "bigger" (just like on Kimo's car, pic attached by OP) I didn't post any pictures in this thread but you guys all know who I am and know where to find all those pictures(examples)
__________________
|
Appreciate
1
0-60Motorsports796.50 |
07-27-2018, 11:48 AM | #10 | |
Brigadier General
797
Rep 3,156
Posts |
Quote:
__________________
Current Mods:
2004 E46 M3cs JB/CSL 2010 E70 X5M AW/BLACK 2011 VW Golf R DSG White/Black IG: @060Motorsports |
|
Appreciate
0
|
07-27-2018, 11:51 AM | #11 | |
Brigadier General
2040
Rep 3,044
Posts
Drives: 2022 BMW X5
Join Date: Nov 2013
Location: Boston
|
Quote:
look at attached pic of Kimo's car posted by OP, u'll see the lower bumper covered in his case with black tape, I did the same but used CF!
__________________
|
|
Appreciate
0
|
07-27-2018, 12:36 PM | #12 |
Brigadier General
2040
Rep 3,044
Posts
Drives: 2022 BMW X5
Join Date: Nov 2013
Location: Boston
|
buy popular demand I decided to take some pictures, similar to posted by OP
not a photo shoot so the quality not the same but it will give better idea as to what I was talking about hope this helps and sorry for somewhat dirty pictures as my front end and some other body parts in need of attention (this is my daily so as expected)
__________________
|
Appreciate
1
0-60Motorsports796.50 |
08-10-2018, 11:16 PM | #13 |
New Member
0
Rep 18
Posts |
that looks good . shop i took it too messed mine up i had it on mine before. and if fell on highway and destroyed it. may be one day i will find another one for decent price
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|