|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
11-01-2020, 07:30 PM | #1 |
New Member
0
Rep 5
Posts |
Need help Purchased a 2009 x5 35d not running with several modules not responding
Hello all. I am new to this forum. I purchased this 2009 x5 35d that was not running. The previous owner purchased it running and within a couple times driving it it quit running. What I don't understand the dealer told him he needed a new intake and dpf. But also said the modules could not be read due to a bad jbe. I tried reading the codes but also came up with vehicle not recognized. I sent the jbe out and had it repaired. I just purchased ISTA+ and ista p and this is what I came up with. Has anyone had a similar problem or have any recommendations for me. Hopefully the photo is attached but all 7 modules on the right have no response. I did also purchased a ICOM for programming. Any help would be much appreciated [IMG][/IMG]
|
11-01-2020, 10:06 PM | #2 |
First Lieutenant
114
Rep 306
Posts |
I'd recommend posting in the e90 coding and e90 diesel sections (linked below), since people tend to tinker with the e90 more and it has its similarities to the e70.
https://www.e90post.com/forums/forumdisplay.php?f=368 https://www.e90post.com/forums/forumdisplay.php?f=377 |
Appreciate
1
Dentman0.00 |
Post Reply |
Bookmarks |
|
|