What Did You Do To Your E70 Today?

[RL18]

Originally Posted by T-Dubbs

m57
Its only really loud from turbo whistles

Needs to be catless if you want it to be loud

[Kapsona]

Originally Posted by Serf27

Are you tuned? Did you feel a noticeable difference?

Yes MHD Stage 2. Difference huge

[Kapsona]

Also installed VRSF Charge Pipe )

Waiting for huge FMIC waiting waiting for arrival.

[T-Dubbs]

Originally Posted by RL18

Needs to be catless if you want it to be loud

mine is

[RL18]

Originally Posted by T-Dubbs

mine is

Ohh I thought I saw a cat after the downpipe under there

[T-Dubbs]

Originally Posted by RL18

Ohh I thought I saw a cat after the downpipe under there

only the small resonator in the ATM mid pipe

[SF07e70]

I bought the wrench when I went to non run flats. Found out that I have a lug wrench that doesn’t go deep enough to remove rear wheel bolts. Been bringing this with me on longer drive for 3 years..

[Serf27]

Originally Posted by SF07e70

I bought the wrench when I went to non run flats. Found out that I have a lug wrench that doesn’t go deep enough to remove rear wheel bolts. Been bringing this with me on longer drive for 3 years..

That’s pretty funny. I should check if that tool fits my wheels too because I have it in the tool kit.

On longer drives I carry an impact gun and socket.

[Movado750]

Originally Posted by Sophisticated Redneck

Designed and made up a new version of the ram air ducts, using an industrial nylon/carbon fiber thermoplastic thats rated for high temps (300F+ continuous) and is incredibly strong, I can put my full weight on one (240lbs) and it doesn't care.

Few more tweaks and it will be ready for prime time. Will make a separate post about it when they are done and make up a few more sets for anyone that wants a set in the upcoming weeks.

(truck usually isn't this messy - all the funky white residue is from the powder needed for the 3d scanner I used to scan the front of the truck when I was designing them)

I have a set of these and the fit is awesome. I hope to test them as soon as my Pure Turbo stage 2 turbos show up, it’s been 6 weeks now.

[Kapsona]

Today in menu )))

[Kapsona]

So after installing VRSF DP, VRSF Charge Pipe and VRSF FMIC I flashed MHD Stage 2+ car literally flying )))

[Kapsona]

aahaa forgot about today's upgrade. installed Spacers 15mm front and 25mm rear looks perfect

[ryansbmw]

How is the install on the fmic?

[Kapsona]

Originally Posted by ryansbmw

How is the install on the fmic?

Man, it was tricky one. But best mod I made on this car.

I started simply, disassembled car from underneath, remove dust shield, then transmission radiator protection arm, then fmic holder plastic, remove fmic clips and disconnect boost pipe and charge pipe. fmic tightly mounted even if nothing holds it i spent half hour to remove it without damaging anything, finally I remove it. But when I tried to install new one, it wouldn't fit I tried from different angles but without luck. Then I disassembled whole front side. remove bumper remove bumper holder and diffuser. the it fits, but I spent 2 hours connecting charge pipe and boost pipe, they goes in hole perfectly but clips wouldn't lock them, after trying several tactics I finally lock them and triple check them then I assembled everything and flash stage 2+ car pulls as hell ))

[Kapsona]

Hi everyone,

Finally found time for Oil catch can installation on my E70 n55. Final result is not as ugly as I thought it would be )) hope it will protect engine.[IMG][/IMG]

[320iVan]

Originally Posted by Kapsona

Hi everyone,

Finally found time for Oil catch can installation on my E70 n55. Final result is not as ugly as I thought it would be )) hope it will protect engine.[IMG][/IMG]

Hey! how much oil does he eat?

[320iVan]

snow time does not always give joy and fun (ice under the snow did his job.
Total: painting the bumper + painting the wing + repairing my headlights and replacing the bumper on LADA

[Kapsona]

Originally Posted by 320iVan

Hey! how much oil does he eat?

Actually didn't notice any oil eating before. Using AMSOIL 0-40 drive 2000km level is the same. Hope it will be same till the end of next change

[TTV8M]

Originally Posted by laselvasurf

Swapped out the original X5M rear badge for an all black one. The //M was fading, so I thought I'd try a different look.

[Nyc Dito]

Updated my trans tune with Rod again (Sutphin Tuning). This is the last update until I finally get his torque Converter aka the GameChanger .

His trans tune really helps the 35D shift muuuuuch nicer than stock. I can only imagine swapping out the TC.

[imschwaggy]

https://youtu.be/tOeQu711Uk0

Added some $40 amazon grills because the chrome ones bother me. Mostlikely going to paint the oem ones black. Didnt have my glasses on when I bought them and didnt know it was the double slat (double louver) grills. I like the bigger slats, looks meaner.

Bought some h&r lowering springs, was supposed to get em installed today but the shop double booked. Will have to wait till next year 🥲. Paid for 2 day shipping with priority delivery for nothing lol. RIP

- looking to get the dinan s1 tune, catless downpipes, and xhp trans tune in january. Check out my channel, will be documenting this build (yes build because i have custom parts im trying to get made for this thing lol).

http://youtube.com/imschwaggy

[Musk]

How often do you drain your catch can?