XBimmers.com | BMW X6 Forum X5 Forum
 
TireRack





Go Back   XBimmers.com | BMW X6 Forum X5 Forum > BMW X5 Forums > X5 Photo/Video/Audio Gallery

Post Reply
 
Thread Tools Search this Thread
      04-14-2023, 12:06 PM   #23
0-60Motorsports
Brigadier General
0-60Motorsports's Avatar
Bahrain
855
Rep
3,198
Posts

Drives: BMW M3 JB 04 Coupe
Join Date: Aug 2007
Location: Kingdom of Bahrain

iTrader: (1)

Quote:
Originally Posted by Sophisticated Redneck View Post
Update: I have finished the setup and install of the new CNC mill that I will be using to make a few parts for the intakes: Mounting brackets, screw bosses, & most importantly the fixture plates that will allow me to manufacture the intakes in single piece prints with superior strength & quality that will last the lifetime of the vehicle.

To dial in the mill and get it ready for production, I made up a simple test project: The M paper weight (or pet rock 2.0 lol). This was the very first cuts made on the mill and it turned out exceptionally well. I am going to make up a few more of these as I continue to get everything dialed in and the mill ready for the intake production. I will include one of these with every pre-order of the intakes just as a fun freebie .

Expecting to begin intake production in a about a week, will update again as we get closer.
That’s awesome! Looking forward to it
__________________
Current Mods:
2004 E46 M3cs JB/CSL
2010 E70 X5M AW/BLACK
2011 VW Golf R DSG White/Black
IG: @060Motorsports
Appreciate 0
      04-16-2023, 08:18 AM   #24
TTV8M
First Lieutenant
TTV8M's Avatar
129
Rep
386
Posts

Drives: '23 AMG GLE53, '10 X6M
Join Date: Feb 2016
Location: NJ 08805

iTrader: (0)

Garage List
2023 AMG GLE53  [0.00]
2010 BMW X6M  [0.00]
2008 Mini Cooper S  [0.00]
Extremely professional craftsmanship. A custom shop wouldn't even be this good. Very excited for the prototype. I don't want to get ahead of myself, but a custom engine cover would be the icing on the cake. Maybe next year for that. My pure turbo stage 2s will love those intakes.


Also exciting to hear about the CCV custom solutions , especially since us non-TUs don't have that CCV maize in the heads, I think, correct me if I'm wrong.


Quote:
Originally Posted by Sophisticated Redneck View Post
Been working on this for about a year, getting very close to release version. Coming out for the M, 50i, & 35d. Will make 35i version too if enough demand. Massive difference on the 50i, was stuck at 515hp with stock intakes + stage 2 tune, downpipes & JB4. With new turbo inlets & intake power bumped to just a bit over 600hp and dropped 0-60 to 3.6 & 1/4 mile to 11.7. This is on a engine/transmission with 185k miles and no launch control.

__________________
'10 X6M
'08 Cooper S
Appreciate 0
      04-26-2023, 03:52 PM   #25
TTV8M
First Lieutenant
TTV8M's Avatar
129
Rep
386
Posts

Drives: '23 AMG GLE53, '10 X6M
Join Date: Feb 2016
Location: NJ 08805

iTrader: (0)

Garage List
2023 AMG GLE53  [0.00]
2010 BMW X6M  [0.00]
2008 Mini Cooper S  [0.00]
Sell some paper weights, make some $$ to pay for the mill machine
__________________
'10 X6M
'08 Cooper S
Appreciate 0
      05-20-2023, 10:17 PM   #26
Sophisticated Redneck
Lieutenant Colonel
1440
Rep
1,564
Posts

Drives: 2012 BMW X5 50i
Join Date: Jul 2018
Location: CA

iTrader: (0)

Thanks TTV8M!


Update: Mill is now fully up to speed and dialed in, I am doing light production of the Intake Manifold support brackets now (see pic) but true intake manifold production will not begin until I finish up prior commitments for a friend and investor who made the acquisition of the mill possible. Only about 5-7 days left on that and then will have a time window to get the rest of the pieces in production. Will post update again at that time.

All of the aluminum parts will be Anodized Black, will leave some natural finish for those who prefer that finish or want to custom paint it. M logo will be added for all M versions (or by request).
Attached Images
  

Last edited by Sophisticated Redneck; 05-20-2023 at 10:29 PM..
Appreciate 2
argento568.50
TTV8M128.50
      05-21-2023, 12:13 AM   #27
0-60Motorsports
Brigadier General
0-60Motorsports's Avatar
Bahrain
855
Rep
3,198
Posts

Drives: BMW M3 JB 04 Coupe
Join Date: Aug 2007
Location: Kingdom of Bahrain

iTrader: (1)

Looks fantastic!
__________________
Current Mods:
2004 E46 M3cs JB/CSL
2010 E70 X5M AW/BLACK
2011 VW Golf R DSG White/Black
IG: @060Motorsports
Appreciate 0
      06-20-2023, 11:20 AM   #28
Bob H
New Member
United_States
6
Rep
25
Posts

Drives: E70 X5 diesel
Join Date: Dec 2015
Location: Greensboro, NC

iTrader: (0)

How are things going on the intakes?
Appreciate 0
      06-24-2023, 06:40 PM   #29
Sophisticated Redneck
Lieutenant Colonel
1440
Rep
1,564
Posts

Drives: 2012 BMW X5 50i
Join Date: Jul 2018
Location: CA

iTrader: (0)

Quote:
Originally Posted by 0-60Motorsports View Post
Looks fantastic!
Thanks 0-60!

Quote:
Originally Posted by Bob H View Post
How are things going on the intakes?
Going good! Anodizing setup is coming in next week. Previous mentioned investor/friend project got delayed but now in final stages of completion adn wrapping it up for him so will be able to focus much more time on the intake production very soon.

After Intakes are wrapped up, catch-cans/mounts will follow right after and discounts will be available to anyone who purchased an intake. Easy to install Oil pressure gauge kit will follow right after.

Will make another update next week as soon as the anodizing setup is complete with pics of the parts in black, blue, & natural (custom colors will be available on request).

As I am getting close to final release, working on website for the actual intake for ordering options/color choices, combos, etc and will direct everyone there for final selections before I ship.
Appreciate 4
      06-25-2023, 03:32 AM   #30
0-60Motorsports
Brigadier General
0-60Motorsports's Avatar
Bahrain
855
Rep
3,198
Posts

Drives: BMW M3 JB 04 Coupe
Join Date: Aug 2007
Location: Kingdom of Bahrain

iTrader: (1)

Quote:
Originally Posted by Sophisticated Redneck View Post
Going good! Anodizing setup is coming in next week. Previous mentioned investor/friend project got delayed but now in final stages of completion adn wrapping it up for him so will be able to focus much more time on the intake production very soon.

After Intakes are wrapped up, catch-cans/mounts will follow right after and discounts will be available to anyone who purchased an intake. Easy to install Oil pressure gauge kit will follow right after.

Will make another update next week as soon as the anodizing setup is complete with pics of the parts in black, blue, & natural (custom colors will be available on request).

As I am getting close to final release, working on website for the actual intake for ordering options/color choices, combos, etc and will direct everyone there for final selections before I ship.
Good news I can’t wait for this to get going…
__________________
Current Mods:
2004 E46 M3cs JB/CSL
2010 E70 X5M AW/BLACK
2011 VW Golf R DSG White/Black
IG: @060Motorsports
Appreciate 1
dew621.50
      07-08-2023, 11:15 AM   #31
dew62
Enlisted Member
2
Rep
37
Posts

Drives: x8m
Join Date: Jun 2021
Location: FL

iTrader: (0)

Any updates
Appreciate 0
      07-18-2023, 05:42 PM   #32
Sophisticated Redneck
Lieutenant Colonel
1440
Rep
1,564
Posts

Drives: 2012 BMW X5 50i
Join Date: Jul 2018
Location: CA

iTrader: (0)

Quote:
Originally Posted by dew62 View Post
Any updates
I am Still finishing up the previous mentioned work commitment that I have to complete before I can switch back to intake production (along with the catch cans). Took longer then expected but now almost complete. Will update here again as soon as I am back in production on the intakes.
Appreciate 0
      08-02-2023, 06:38 AM   #33
BLX5ME70
New Member
Indonesia
2
Rep
13
Posts

Drives: X5
Join Date: Mar 2023
Location: Indonesia

iTrader: (0)

Thanks for sharing mate. Do you sell it?
Appreciate 0
      08-02-2023, 11:49 AM   #34
Dawgz
2022 M4 Comp Xdrive
1060
Rep
1,565
Posts

Drives: 2022 M4 Comp Xdrive
Join Date: Feb 2019
Location: USA

iTrader: (0)

Quote:
Originally Posted by Sophisticated Redneck View Post
Been working on this for about a year, getting very close to release version. Coming out for the M, 50i, & 35d. Will make 35i version too if enough demand. Massive difference on the 50i, was stuck at 515hp with stock intakes + stage 2 tune, downpipes & JB4. With new turbo inlets & intake power bumped to just a bit over 600hp and dropped 0-60 to 3.6 & 1/4 mile to 11.7. This is on a engine/transmission with 185k miles and no launch control.



AMAZING work!!!!
Appreciate 0
      09-25-2023, 04:59 AM   #35
Sophisticated Redneck
Lieutenant Colonel
1440
Rep
1,564
Posts

Drives: 2012 BMW X5 50i
Join Date: Jul 2018
Location: CA

iTrader: (0)

Apologies for being MIA, I had to complete a major project for a business investor/friend that was key to my business startup before I could get back to the intakes and did not want to return until that was complete.

Now that this milestone has been reached, the intakes will enter full production starting this Wednesday the 27th. I will start a new thread in the vendors forum and provide a link here to it. This thread will be updated daily as production goals are met. All pre-orders will be completed and shipped within the next two weeks.

As of show of gratitude for all of those that pre-ordered and stayed with me these past months, after the intake production is complete and all pre-orders are shipped. Every pre-order will be receiving a complete catch-can kit free of charge. This kit will include: Catch cans, Mounts specific to the E70, Valve cover adapters, custom vacuum pressure regulators, full -10AN hoses. This kit will be plug and play and will normally retail for 300+ dollars. I will start production of the Catch can kits immediately after completion and shipment of all intakes.

Below are pics of the kit installed in a N63 powered 750il. The kit all pre-orders will be receiving will look nearly identical to the pictures attached for the E70, save for a slightly different and updated mount to bolt to the E70. The beauty cap is not limited to the M logo. I can mill just about anything into it, I will contact all pre-orders when the time comes for anodizing color and logo choice.

Check back here Wednesday for a new update and link to the intakes production thread.
Attached Images
              

Last edited by Sophisticated Redneck; 09-25-2023 at 06:30 AM..
Appreciate 2
      09-25-2023, 05:09 AM   #36
0-60Motorsports
Brigadier General
0-60Motorsports's Avatar
Bahrain
855
Rep
3,198
Posts

Drives: BMW M3 JB 04 Coupe
Join Date: Aug 2007
Location: Kingdom of Bahrain

iTrader: (1)

Quote:
Originally Posted by Sophisticated Redneck View Post
Apologies for being MIA, I had to complete a major project for a business investor/friend that was key to my business startup before I could get back to the intakes and did not want to return until that was complete.

Now that this milestone has been reached, the intakes will enter full production starting this Wednesday the 27th. I will start a new thread in the vendors forum and provide a link here to it. This thread will be updated daily as production goals are met. All pre-orders will be completed and shipped within the next two weeks.

As of show of gratitude for all of those that pre-ordered and stayed with me these past months, after the intake production is complete and all pre-orders are shipped. Every pre-order will be receiving a complete catch-can kit free of charge. This kit will include: Catch cans, Mounts specific to the E70, Valve cover adapters, custom vacuum pressure regulators, full -10AN hoses. This kit will be plug and play and will normally retail for 300+ dollars. I will start production of the Catch can kits immediately after completion and shipment of all intakes.

Below are pics of the kit installed in a N63 powered 750il. The kit all pre-orders will be receiving will look nearly identical to the pictures attached for the E70, save for a slightly different and updated mount to bolt to the E70. The beauty cap is not limited to the M logo. I can mill just about anything into it, I will contact all pre-orders when the time comes for anodizing color and logo choice.

Check back here Wednesday for a new update and link to the intakes production thread.
Thats awesome news! Cant wait
__________________
Current Mods:
2004 E46 M3cs JB/CSL
2010 E70 X5M AW/BLACK
2011 VW Golf R DSG White/Black
IG: @060Motorsports
Appreciate 0
      09-28-2023, 03:26 AM   #37
Sophisticated Redneck
Lieutenant Colonel
1440
Rep
1,564
Posts

Drives: 2012 BMW X5 50i
Join Date: Jul 2018
Location: CA

iTrader: (0)

Production has now started on the intakes! Below is a link to the new thread in the Vendors forum. This thread will have daily production updates so please check this new thread if you are on the pre-order list to get the latest daily updates.

https://www.xbimmers.com/forums/show...4#post30525944
Appreciate 0
      09-30-2023, 07:15 PM   #38
TTV8M
First Lieutenant
TTV8M's Avatar
129
Rep
386
Posts

Drives: '23 AMG GLE53, '10 X6M
Join Date: Feb 2016
Location: NJ 08805

iTrader: (0)

Garage List
2023 AMG GLE53  [0.00]
2010 BMW X6M  [0.00]
2008 Mini Cooper S  [0.00]
They look amazing. Great accomplishment
__________________
'10 X6M
'08 Cooper S
Appreciate 0
      04-01-2024, 04:27 PM   #39
Jables92
New Member
Jables92's Avatar
United_States
7
Rep
11
Posts

Drives: 2012 BMW X5 35D
Join Date: Mar 2024
Location: Elkton, MD

iTrader: (0)

Garage List
2012 BMW X5 35D  [0.00]
Very excited for the 35d 😎
Appreciate 0
      05-03-2024, 03:29 PM   #40
Deftronix
First Lieutenant
170
Rep
333
Posts

Drives: 12 X5d & 20 X7 M50i
Join Date: Nov 2015
Location: US

iTrader: (0)

Looking forward to the 35D as well!
Appreciate 0
      09-11-2024, 04:32 PM   #41
RL18
Major
United_States
321
Rep
1,091
Posts

Drives: 2011 335d sport
Join Date: Nov 2017
Location: Maine

iTrader: (0)

Quote:
Originally Posted by Deftronix View Post
Looking forward to the 35D as well!
Quote:
Originally Posted by Jables92 View Post
Very excited for the 35d 😎
So I was the test vehicle for the 35d intakes and I haven’t heard from him in over a year, so I’ve lost hope at this point in this happening.

I am however going to be getting a nice 3d scanner sometime around next month and I’m probably going to be attempting my own version of an intake for our 35ds. So maybe someday soon I’ll get the project done and available for those who want one.

__________________
2011 335d tuned by B.R.R.
2011 X5 35d tuned by B.R.R.
Appreciate 2
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:09 PM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST