Turbo hose (trying to identify part)

[askari]

Hey guys

My 2012 X5d is throwing a P0299 code turbocharger under post condition and getting a engine malfunction errror. The error comes and goes

This hose has a couple of cracks and it and see a little oil around the area. Most likely the cause

Can someone help confirm the part number. I think it’s BMW PART #11617807985. Couldn’t confirm BMW parts closed today and will probably have to wait until Tuesday.



Thanks

[wcs531]

realoem.com is your friend. With all the oil all over the place it looks like its been busted for a while, surprised youre just now getting a code.

Part# is 11618506079. I dont think the part number you had is even on north american diesels.

BMW sells it combined with the hard pipe unfortunately.

Other options: (I see you're in Canada so you might have to find other sources for items below for quicker delivery)

1:
Dremel off both clips and replace soft hose part with silicone hose AND new hose clamps (not sure of sizing off the top of my head). The NA BMW diesel facebook group has a number of people using this I believe: HPS CAC-250-Cold.
https://www.amazon.com/HPS-CAC-250-C...s%2C105&sr=8-1


2:
Dremel off the flexible hose from the hard pipe and install this: https://www.atmspeedshop.com/product...31777630814348

[askari]

Originally Posted by wcs531

realoem.com is your friend. With all the oil all over the place it looks like its been busted for a while, surprised youre just now getting a code.

Part# is 11618506079. I dont think the part number you had is even on north american diesels.

BMW sells it combined with the hard pipe unfortunately.

Other options: (I see you're in Canada so you might have to find other sources for items below for quicker delivery)

1:
Dremel off both clips and replace soft hose part with silicone hose AND new hose clamps (not sure of sizing off the top of my head). The NA BMW diesel facebook group has a number of people using this I believe: HPS CAC-250-Cold.
https://www.amazon.com/HPS-CAC-250-C...s%2C105&sr=8-1


2:
Dremel off the flexible hose from the hard pipe and install this: https://www.atmspeedshop.com/product...31777630814348

Wow. Thanks for that!! Really appreciate it. Yes forgot about that site. I figured I was searching the wrong part #

Engine light is currently on for a glow plug module. so sometimes I miss the new codes. The engine malfunction just started though which is what prompted me to check. I’ll look around for the part on Tuesday, Monday is a holiday up here and all the dealers weren’t answering the phone today.