Coding used mechatronics

[KadizzleD]

Anyone know where I can send my used mechatronics unit to be coded to my car? It's the last thing I have yet to replace (besides the whole trans, which I have just in case) in the never ending torque converter lockup code saga iv'e been blessed with.

I know from reading other threads if I install the used one with a mismatched vin, the car will not go out of park.

Iv've had the trans down twice already so I want to try replacing the mechatronics unit first before dropping the trans for a 3rd time.

I have INPA and ISTA D, but i assume ISTA P needs to be used to code it which I don't have.

Thanks!

2009 X5 3.0
ZF 6 speed

[RichardH]

Originally Posted by KadizzleD

Anyone know where I can send my used mechatronics unit to be coded to my car? It's the last thing I have yet to replace (besides the whole trans, which I have just in case) in the never ending torque converter lockup code saga iv'e been blessed with.

I know from reading other threads if I install the used one with a mismatched vin, the car will not go out of park.

Iv've had the trans down twice already so I want to try replacing the mechatronics unit first before dropping the trans for a 3rd time.

I have INPA and ISTA D, but i assume ISTA P needs to be used to code it which I don't have.

Thanks!

2009 X5 3.0
ZF 6 speed

https://www.bimecu.com/

[Juno01]

Had mine done here https://bimmerscan.com/

[smass]

Check with Revmax. They can test your entire valve body assembly.

https://revmaxconverters.com/