01-07-2016, 07:44 PM | #1 |
Major
209
Rep 1,044
Posts |
X5M Wheels on Non-M X5?
Ok so I've found a nice set of aftermarket wheels I'm looking to pickup for my X5 35d. I've done some researching and just want to verify that since these wheels are coming from an X5M, the fronts will fit without issue however I will need to have the rears bored out to 74.1mm
Is this correct? Anything else I should know before pulling the trigger? |
01-07-2016, 07:55 PM | #2 |
FDNY Engine 55
681
Rep 2,115
Posts |
Fronts are a direct fit 74.1mm, rears are 72.5mm on an X5M...you could either bore them out to 74.1mm or buy 15mm hub centric spacers
|
Appreciate
0
|
01-07-2016, 08:01 PM | #3 |
Major
209
Rep 1,044
Posts |
Awesome. Since Fitment was custom to X5M it looks like I'll just have to have them bored which isn't too big of a deal. Hopefully I'll have an update to my build thread with some pics in a couple weeks
|
Appreciate
0
|
01-07-2016, 09:12 PM | #4 |
Colonel
445
Rep 2,036
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|