01-03-2016, 03:50 PM | #1 |
Private First Class
24
Rep 195
Posts |
e70 xdrive35i n55 catch can?
I'm interested in installing a catch can for MY13 e70 35i. I've searched but haven't had any luck finding info on a specific kit or DIY. Has anyone successfully installed one on their e70?
|
01-03-2016, 08:07 PM | #2 |
*May contain nuts
193
Rep 286
Posts |
There's some pictures of one fitted to the S63 in this thread.
ECS sell generic ones for the 35i > https://www.ecstuning.com/BMW-E70-X5...ine/ES2500608/ Otherwise check fleabay for universal kits - they're all pretty similar (just check for installation clearances, hose fitting sizing and choose one that has internal baffles). |
Appreciate
0
|
01-04-2016, 01:08 AM | #3 |
Captain
107
Rep 994
Posts |
What do you think you'll gain from one? There are so many other things you could do with more quantifiable benefits/gains. catch cans while serving a purpose, seem to be the new "nos," or BOV bling item to get.
Otherwise, a catch can is a catch can, and you just install what fits. "kit specific," only means more expensive. |
Appreciate
0
|
01-05-2016, 06:55 PM | #4 | |
Private First Class
24
Rep 195
Posts |
Quote:
|
|
Appreciate
0
|
01-06-2016, 11:06 AM | #5 |
Captain
107
Rep 994
Posts |
Im at 65k miles with no appreciable issuee and never cleaned via bmw. I scoped the intake and saw little build up as is. The n55 is much better than the n54. But direct injection will always have this issue but not ne a burden till you reach high miles or have poor maintenance schedules (eg pcv etc)
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|