03-09-2024, 12:58 PM | #1 |
Captain
569
Rep 905
Posts |
OEM B&W Tweeter 65-13-9-279-629
BMW OEM Bowers & Wilkins Tweeter with resistor in OEM box. I have Qty.3, $90/each or $225 shipped for all three (3). These list for $117.72+ new plus shipping. I bought these new for my B&W retrofit project in my E70 X5M, however decided to go with custom crossovers instead and the non-diamond B&W tweeters without resistors. FWIW, they are plug and play into the E70 platform, at least with S752A individual audio option. However, these are nominally used in the G05, G06, and G07 X-Series vehicles. The B&W's have an exceptional clarity. These are NOT diamond B&W tweeters. Thanks for looking.
__________________
2013 X5M AW/Blk
Build Thread: https://www.xbimmers.com/forums/show....php?t=1499820 Last edited by argento; 03-09-2024 at 01:09 PM.. |
03-09-2024, 02:38 PM | #2 |
First Lieutenant
64
Rep 352
Posts |
What is the difference between the diamond version and these? Currently on hi-fi audio with matchup7 and wanting more clarity up front. But not really interested in something overly bright.
__________________
|
Appreciate
0
|
03-09-2024, 03:51 PM | #3 |
Captain
569
Rep 905
Posts |
Besides the fact that diamond tweeters are $700 (65-13-9-350-327) more expensive than the -329, I can only offer opinion.
I considered using the -327 tweeters in my retrofit, so I asked the crossover designer I was using as he spent a career designing high end speakers..he offered this: "The main advantage they [diamond tweeters] have is that the membrane works as a piston higher in frequency allowing greater clarity but other than that, they have a rolled off top end and sound harsher than metal. The metal domes can be made thinner and easier to dampen the ringing, also the metal domes weigh less and had more output at the top..........there is much more to be said, but won’t go into it too much here. I designed many hi-fi tweeters. Personally, I would go with the metal dome over the diamond dome as the diamond will have a lack of air due to its fall off above 10khz. Since you are listening off axis mostly in a car, you want a boost above 10khz, not a roll-off" I can't add much to this assessment. I'm using the same tweeter now (65-13-2-622-773) w/o the filter and I'm happy with the improved clarity. I find them well rounded and not piercing, but everybody's interpretation of sound is subjective. Over a year ago you could source used diamond tweeters for about $330/ea on ebay, but I don't see any on there today. UPDATE: I almost forgot, I did roll off the top end when I tuned the system with RTA and microphone at the driver's headrest. My graph is in this link plus a lot of discussion on these speakers: Best Audio Upgrade for the X5: https://www.xbimmers.com/forums/show...php?t=1774331] I hope this helps.
__________________
2013 X5M AW/Blk
Build Thread: https://www.xbimmers.com/forums/show....php?t=1499820 Last edited by argento; 03-09-2024 at 03:58 PM.. |
Appreciate
0
|
07-26-2024, 09:33 AM | #4 |
Captain
569
Rep 905
Posts |
Bump.
__________________
2013 X5M AW/Blk
Build Thread: https://www.xbimmers.com/forums/show....php?t=1499820 |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
b&w, bowers, speaker, tweeter, wilkins |
|
|