12-05-2019, 12:03 PM | #1 |
First Lieutenant
96
Rep 397
Posts |
F85 full Exhaust on E70
Anyone know if this would work fitment wise? I'm talking the entire thing
I already have the TU turbos... I know someone fit an f85 race exhaust on an e70 already. Besides the downpipes I can source an entire exhaust for cheap and get some high-flow cats. Maybe pointless .... my exhaust sucks right now and i axtually like how the f85 sounds |
12-05-2019, 03:04 PM | #2 |
Second Lieutenant
93
Rep 291
Posts |
Sounds like a cool doable project if you know how to weld. More than likely you'll have to relocate/custom mounts for the front section. I would leave the rear section for a custom exhaust shop as there will be a lot of cutting and fabrication work for the rear muffler and tips.
Budget for the worst case scenario that every connection would need custom work to work. The good thing is that you'll modifying the F85 exhaust and not the stock if you should ever need to go back to the original exhaust system. I know how to mig weld and am starting to look at different setups to do for my track car. So I'm interested in see how this turns out if you go through with it. https://www.realoem.com/bmw/enUS/par...BMW-X5_M&mg=18 https://www.realoem.com/bmw/enUS/par...BMW-X5_M&mg=18 |
Appreciate
0
|
12-05-2019, 03:35 PM | #3 |
First Lieutenant
96
Rep 397
Posts |
Yea i was checking those out and the mounting points seem very very similar I am hoping for more of just a bolt on solution ... and not require much if any work.
See where i go with this I'm going to fabricate my own setup based on the redstar in titanium and just want this more as a bolt on until I have the time. I've already cut my exhaust when i had the fabspeed |
Appreciate
0
|
12-06-2019, 08:09 AM | #6 |
Second Lieutenant
93
Rep 291
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|