FEELER: Selling 2011 X5M stock wheels 20 inch

Sylvan Lake V35 · 02-15-2014, 11:26 AM

I was thinking of selling my HREs and running a square 299 set up, buy your wheels and run the rears all around...it would look sick with the concave of the rears. Then run the fronts all around for winter the 20x10" would fit 275/40 nokians nicely for winter....

I already have 5 sets of X5 wheels someone please buy these before I succumb to the temptation.

Draper · 02-15-2014, 11:31 AM

Quote:

Originally Posted by Sylvan Lake V35

You would either need an adaptor or you can get the rear hubs bored out typically $50-75/wheel. The fronts fit fine but the rears are 72.1mm and regular X5s are 74.5mm (roughly) I have had a set of wheels bored out to fit my wifes X5d and i just sent them to a wheel repair shop they said they do it quite a bit and i havent had any issues. You could also get a spacer/adapter from 1 or 2 companies if i recall right.

Do you know if the 2014+ models have the same hub sizes as the E70?

upstate650 · 02-15-2014, 11:31 AM

I've got a set of 299's for you!

SouthShoreM3 · 02-15-2014, 11:56 AM

Hey upstate don't thread jack!!! Ha.

Sylvan Lake V35 · 02-15-2014, 11:19 PM

Quote:

Originally Posted by jzbm3

Do you know if the 2014+ models have the same hub sizes as the E70?

Yes they have the same as the regular E70, 74.1mm bore front and rear.

SouthShoreM3 · 02-19-2014, 10:35 AM

All,

Hopefully I will have an update this afternoon for transitioning the wheels.

A few have responded, but no response back. Please let me know if you have any questions.

Need these locked up for a new owner!!!

SouthShoreM3 · 02-19-2014, 09:04 PM

All I really need these gone. Dropping price to 690. This does not include shipping fees and any packing materials to protect the wheels.

They are straight and true. Just have some curb rash from the previous owner.

Draper · 02-19-2014, 11:09 PM

Quote:

Originally Posted by SouthShoreM3

All I really need these gone. Dropping price to 690. This does not include shipping fees and any packing materials to protect the wheels.

They are straight and true. Just have some curb rash from the previous owner.

Any pics yet?

SouthShoreM3 · 02-20-2014, 07:12 AM

As I mentioned I any pics but they are so dirty you wouldn't even know the difference. Going to be nice this weekend so I can wash the car by hand. Ill post pics this weekend.

SouthShoreM3 · 02-23-2014, 12:54 PM

All here are a pic of the wheels. Only 3 out of 4 have some minor rub rash.

And ass shot for good measure! My space grey painted rear diffuser is hard to see but adds a great contrast to the black.

bmellion · 02-27-2014, 02:51 PM

call me at 401-524-1772. I'm seriously interested.

SouthShoreM3 · 03-02-2014, 11:37 AM

All,

Still no ETA from Velos, which I have pressed that I need them (and I do becuase I'm moving and don't have the room for another set).

I am hoping for the weeks of March 10th. This will have been over 6 weeks. So I will keep you posted.

BE X · 03-04-2014, 09:47 PM

Sent a PM - interested

SouthShoreM3 · 03-11-2014, 08:13 AM

All these are Pending sale. Thank you for all the interest.

SouthShoreM3 · 03-24-2014, 09:07 PM

Moderators please remove! SOLD to TROYMI!!! Good guy and has been a real pleasure to sell these to such a good home and good guy.

isugoo · 03-25-2014, 02:21 PM

do you have your new wheel pics for us yet?

SouthShoreM3 · 03-25-2014, 04:13 PM

Here are some pics. As well as the new caliper colors. Note to EVERYONE!!! Do not try and build a 20inch wheel and try and put a 405mm BREMBO BBK. It will not clear.

A lot of heartache and time has gone into this. When it's done it will truly be a one of one set up.

For those interested in wheel finish and caliper finish. The wheels are the new VELOS signature series. Weight of wheels were 20.2 front and 20.8 rear. Stock wheels weigh 40f and 44r. That's a huge weight savings.

Color is a hand tinted clear coat with brushed gunmetal.

Caliper color is Indianapolis red (individual M6/M5 color) with space grey BREMBO lettering. I have space grey all throughout the car (rear diffuser, X5M logo, back BMW logo bracket is space grey, the side runners along the doors are space grey and the side markers are space grey)

upstate650 · 03-25-2014, 04:25 PM

Quote:

Originally Posted by SouthShoreM3

Here are some pics. As well as the new caliper colors. Note to EVERYONE!!! Do not try and build a 20inch wheel and try and put a 405mm BREMBO BBK. It will not clear.

A lot of heartache and time has gone into this. When it's done it will truly be a one of one set up.

For those interested in wheel finish and caliper finish. The wheels are the new VELOS signature series. Weight of wheels were 20.2 front and 20.8 rear. Stock wheels weigh 40f and 44r. That's a huge weight savings.

Color is a hand tinted clear coat with brushed gunmetal.

Caliper color is Indianapolis red (individual M6/M5 color) with space grey BREMBO lettering. I have space grey all throughout the car (rear diffuser, X5M logo, back BMW logo bracket is space grey, the side runners along the doors are space grey and the side markers are space grey)

Have you gotten that BBK kit on with those wheels?

mikew2069 · 03-25-2014, 05:35 PM

Looks sick. What widths and offsets you go with?

SouthShoreM3 · 03-25-2014, 06:55 PM

Not yet. We have some clearance problems with the caliper touching the barrel.

upstate650 · 03-25-2014, 07:23 PM

Quote:

Originally Posted by SouthShoreM3

Not yet. We have some clearance problems with the caliper touching the barrel.

Yikes. Fixable or no?

SouthShoreM3 · 03-26-2014, 07:36 AM

A lot of machining. It's fixable just a lot of work no one anticipated.

02-15-2014, 11:26 AM	#23
Sylvan Lake V35 Vanilla Gorrilla 31 Rep 610 Posts Drives: X5M & X5 35d Join Date: Nov 2012 Location: Alberta iTrader: (0)	I was thinking of selling my HREs and running a square 299 set up, buy your wheels and run the rears all around...it would look sick with the concave of the rears. Then run the fronts all around for winter the 20x10" would fit 275/40 nokians nicely for winter.... I already have 5 sets of X5 wheels someone please buy these before I succumb to the temptation. __________________ X5M, Eisenmann exhaust, 22" HRE wheels, catless down pipes, Stage II tune/X5 Diesel, Lowered & Tuned
	Appreciate 0 Quote

02-15-2014, 11:31 AM	#25
upstate650 Lieutenant Colonel 305 Rep 1,719 Posts Drives: 2014 650xi Gran Coupe Msport Join Date: May 2013 Location: The Hinterlands of Upstate NY iTrader: (3) Garage List 2020 BMW M340xi [0.00]	I've got a set of 299's for you!
	Appreciate 0 Quote

02-15-2014, 11:56 AM	#26
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	Hey upstate don't thread jack!!! Ha.
	Appreciate 0 Quote

02-19-2014, 10:35 AM	#28
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	All, Hopefully I will have an update this afternoon for transitioning the wheels. A few have responded, but no response back. Please let me know if you have any questions. Need these locked up for a new owner!!!
	Appreciate 0 Quote

02-19-2014, 09:04 PM	#29
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	All I really need these gone. Dropping price to 690. This does not include shipping fees and any packing materials to protect the wheels. They are straight and true. Just have some curb rash from the previous owner.
	Appreciate 0 Quote

02-20-2014, 07:12 AM	#31
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	As I mentioned I any pics but they are so dirty you wouldn't even know the difference. Going to be nice this weekend so I can wash the car by hand. Ill post pics this weekend.
	Appreciate 0 Quote

02-23-2014, 12:54 PM	#32
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	All here are a pic of the wheels. Only 3 out of 4 have some minor rub rash. And ass shot for good measure! My space grey painted rear diffuser is hard to see but adds a great contrast to the black. Attached Images
	Appreciate 0 Quote

02-27-2014, 02:51 PM	#33
bmellion Captain 154 Rep 675 Posts Drives: 2020 M5 Join Date: Apr 2012 Location: Boca Raton, FL iTrader: (1)	call me at 401-524-1772. I'm seriously interested. __________________ 2020 BMW M5 2014 BMW M5 Competition Pack, Dinan Stage 2, Full Eisenmann Race, MSR Intake and lots of carbon fiber... 2013 BMW X5M, Dinan Exhaust, Dinan Stage 1, Dinan Suspension (gone) 2013 BMW M6 Eisenmann Race(gone)
	Appreciate 0 Quote

03-02-2014, 11:37 AM	#34
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	All, Still no ETA from Velos, which I have pressed that I need them (and I do becuase I'm moving and don't have the room for another set). I am hoping for the weeks of March 10th. This will have been over 6 weeks. So I will keep you posted.
	Appreciate 0 Quote

03-04-2014, 09:47 PM	#35
BE X Second Lieutenant 50 Rep 229 Posts Drives: X5 35d /X3 35i / R1200R Join Date: Jul 2007 Location: TN iTrader: (3)	Sent a PM - interested
	Appreciate 0 Quote

03-11-2014, 08:13 AM	#36
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	All these are Pending sale. Thank you for all the interest.
	Appreciate 0 Quote

03-24-2014, 09:07 PM	#37
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	Moderators please remove! SOLD to TROYMI!!! Good guy and has been a real pleasure to sell these to such a good home and good guy.
	Appreciate 0 Quote

03-25-2014, 02:21 PM	#38
isugoo Major General 247 Rep 6,125 Posts Drives: 991.2 GTS Join Date: Feb 2008 Location: Irvine, CA iTrader: (73)	do you have your new wheel pics for us yet? __________________ PAST: F80 M3 ZCP \| 911.1 C2S \| F10 M5 ZCP \| E70 X5M \| E90 M3 \| E46 M3 \| E36 M3
	Appreciate 0 Quote

03-25-2014, 04:13 PM	#39
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	Here are some pics. As well as the new caliper colors. Note to EVERYONE!!! Do not try and build a 20inch wheel and try and put a 405mm BREMBO BBK. It will not clear. A lot of heartache and time has gone into this. When it's done it will truly be a one of one set up. For those interested in wheel finish and caliper finish. The wheels are the new VELOS signature series. Weight of wheels were 20.2 front and 20.8 rear. Stock wheels weigh 40f and 44r. That's a huge weight savings. Color is a hand tinted clear coat with brushed gunmetal. Caliper color is Indianapolis red (individual M6/M5 color) with space grey BREMBO lettering. I have space grey all throughout the car (rear diffuser, X5M logo, back BMW logo bracket is space grey, the side runners along the doors are space grey and the side markers are space grey) Attached Images
	Appreciate 0 Quote

03-25-2014, 05:35 PM	#41
mikew2069 Lieutenant Colonel 413 Rep 1,975 Posts Drives: F30 335i MSport Join Date: Oct 2012 Location: Houston iTrader: (2)	Looks sick. What widths and offsets you go with? __________________ 2013 F30 335i ///M-Sport *Forgestar/Challenge/BMS JB4* *Wagner/Evo Race/M-Performance* 2016 F15 50i ///M-Sport *BM3/H&R/Borla*
	Appreciate 0 Quote

03-25-2014, 06:55 PM	#42
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	Not yet. We have some clearance problems with the caliper touching the barrel.
	Appreciate 0 Quote

03-26-2014, 07:36 AM	#44
SouthShoreM3 Passes everything but the gas station 49 Rep 795 Posts Drives: 2010 E90 M3 Join Date: Jul 2010 Location: Boston, MA iTrader: (2)	A lot of machining. It's fixable just a lot of work no one anticipated.
	Appreciate 0 Quote