|
|
|
| 02-12-2023, 12:34 PM | #1 |
|
New Member
12
Rep 7
Posts
Drives: 12 BMW X5 xDrive35i
Join Date: Jan 2023
Location: New Haven, CT
|
'12 X5 xDrive35i is starting but isnt cranking
I recently replaced the Fuel rail pressure sensor, Transmission harness, and Exhaust camshaft position sensor and also a make shift ground wire from autozone. Few weeks ago my car I left my car idling and it suddenly shut off then I thought to my self it can be the battery so I towed it back home bought a battery next day registered it and then it was still the same issue no crank but only starts. Everytime I try turning it on I can hear the starter click once and no crank at all. Also I checked if my engine was seized with a breaker bar and thankfully it was not seized. If you guys have any idea what it can be please let me know!
|
| 02-12-2023, 10:55 PM | #3 |
|
New Member
12
Rep 7
Posts
Drives: 12 BMW X5 xDrive35i
Join Date: Jan 2023
Location: New Haven, CT
|
No error code I was wondering if it can be starter?
|
|
Appreciate
0
|
| 02-13-2023, 12:05 AM | #4 |
|
Brigadier General
 
2851
Rep 4,322
Posts |
Bad starter will trigger an error code.
Was it hard to turn the engine by hand? I had a bad alternator bearing prevent the engine from turning over a few months ago. I HAVE NOT dealt with this personally, but could it be possible that a ground strap from engine to body is bad? |
|
Appreciate
0
|
| 02-13-2023, 12:07 AM | #5 |
|
New Member
12
Rep 7
Posts
Drives: 12 BMW X5 xDrive35i
Join Date: Jan 2023
Location: New Haven, CT
|
The ground strap from the engine is bad! And no the engine was pretty easy to move with the breaker bar
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
