07-26-2020, 11:29 AM | #133 | ||
Private
2
Rep 63
Posts |
Quote:
Btw anyone know how to get this new UI skin on? I have the android 10 unit from 4x4shop and there's no option after id7. I think it's called custom UI GS? Seems like the AVIN people get it with their units? |
||
Appreciate
0
|
07-26-2020, 10:01 PM | #134 | |
Private
2
Rep 63
Posts |
Quote:
Since you got the dongle I'm wondering if there's less lag and delays vs connecting it wirelessly for carplay, thoughts? |
|
Appreciate
0
|
08-03-2020, 09:00 AM | #135 |
Captain
284
Rep 912
Posts |
I have been away for two weeks...now in quarantine for the next two...The good news is my head-unit 720P with Carplay...finally showed-up...(the unit was refunded by AliE - same as half a dozen other other purchases...some of which actually showed up also).
Amazing to see the install journeys reflected here.....I will be reviewing of course...and rounding up parts that may be needed to install to best effect.....my first ever such install. Thanks again for all the input on this thread... |
Appreciate
0
|
08-03-2020, 09:38 AM | #136 | |
Captain
284
Rep 912
Posts |
Quote:
So right now, as I start this - all I need is a better 4ft Aux cable....and a GPS Splitter...(any links to the latter)....My intent is two pass this off to a pro with a few install notes...gathered from you guys...Mine is wireless carplay model... Are these a suitable GPS splitter option? https://www.amazon.ca/Koason-Antenna...6474880&sr=8-1 or https://www.amazon.ca/Dasunny-Coaxia...TF8&pd_rd_i=B0 Last edited by Bilbofraggins; 08-03-2020 at 12:36 PM.. |
|
Appreciate
0
|
08-03-2020, 09:43 AM | #137 | |
Captain
284
Rep 912
Posts |
Quote:
A similar 720P unit with wireless carplay is $1007 (+tax for us) Canadian today...including a GPS splitter My Ali version was 600 Can (refunded) and 43 bucks customs fees... |
|
Appreciate
0
|
08-08-2020, 08:43 AM | #138 |
Private
2
Rep 63
Posts |
So the unit has been working flawlessly until today I started the car and noticed the boot logo didn't come up for android just said no signal on android side, oem side was working fine. Couldn't do anything on android side even after shutting off the car and back on. It only seemed to comeback to normal after I shut off the car for over a minute and restarted it, anyone have this happen?
|
Appreciate
0
|
08-26-2020, 10:39 AM | #139 |
Registered
0
Rep 4
Posts |
I am also finished with the android 10 64gb version in mine
I just finished my on a X6 E71 CiC and also made extenstion to glovecompartment for 2 USB, 4G LTE connector and separate GPS module so its for easy access.
|
Appreciate
0
|
08-28-2020, 09:52 AM | #140 | |
Captain
569
Rep 905
Posts |
Quote:
__________________
2013 X5M AW/Blk
Build Thread: https://www.xbimmers.com/forums/show....php?t=1499820 |
|
Appreciate
0
|
08-30-2020, 07:00 PM | #142 |
Captain
284
Rep 912
Posts |
Installed the unit today...with a GPS splitter.
Didn’t install the round speaker attached to the thin white wires... or the flat paddle antenna. Or the extra RCA bundle that goes in the head unit. Did not install the Aux cable... as the main harness bundle seemed to be already connected with a 3.5mm plug. Couldn't find any wire connectors to go to the center dash speaker! I drive working - sort of... Rear camera/backup lines - no problems Factory NAV and sound working fine. Issues I could use a bit of help with: Firstly what display setting are you using for E71?... the CIC E70 2009 does not work on my 2013... so I selected any NBT 10.25 one... which worked and also CIC for 7 series 2011 worked.. No sound on the android sIde... Looks like I must run the 3.5mm. Does that go into the supplied main harness or into the small head unit bundle (marked mic---I expect not)? What’s the red button on the bottom of the head unit - thinking now it may be just a connector cover for the thin paddle antenna? How do you work carplay... is that the ZLink? Update refreshed my memory on that...I guess I have to try to connect to the phone hotspot and try to activate. Do you need an aux cable if you only use CarPlay once it’s working... The car info, speed and rpm doesn’t register any reading sits on Zero. Finally, my unit is slow to shut down... and does not completely go off.... It sits on a “No Signal“ message. Like the 4x4 shop installer videos, I did'nt disconnect the battery... Help appreciated... Cheers.. Fraggins Last edited by Bilbofraggins; 08-30-2020 at 09:36 PM.. |
Appreciate
0
|
08-30-2020, 09:13 PM | #143 | |
Enlisted Member
9
Rep 33
Posts |
Quote:
2. I think the conclusion is you need to run the Aux cable to the center console to get sound to come from the Android Unit + carplay as well. I think the Aux cable plugs into the main harness. I recall there was only one male Aux connector in the bundle. 3. Display I kept going 1 by 1 till smth worked. I do recall the option with 10.25 is the one that worked. Not sure which 10.25 it is. 4. Carplay is the Zlink app. I had lots of trouble to get it working. In one of the earlier posts I talk about connecting your android unit to your phone hotspot to get internet and going into the Zlink app to press activate. For carplay you need the aux cable to get sounds. 5. No signal - I don't recall. Maybe the GPS issue or maybe just the activation of the Zlink? Just guessing. No idea. |
|
Appreciate
1
Bilbofraggins284.00 |
08-30-2020, 09:30 PM | #144 | |
Captain
284
Rep 912
Posts |
Quote:
Thanks for the pointers...I'll go back in and run the aux (3.5) cable from the harness tomorrow...to the center console....Once I've run it will try the hotspot bit... The "no signal" message after shutdown is weird.... Did you connect anything to the center dash speaker? Do the Speed and RPM dials work? for you Cheers, BF |
|
Appreciate
0
|
08-31-2020, 02:10 AM | #145 |
Registered
5
Rep 4
Posts |
I have the same issue with the OEM screen display, The E70 CIC setting does not work correctly and I am currently using the CIC_7Series setting. The issue I have is the OEM system is quite dull and there is no way to increase the brightness.
If I use the correct CIC_E70 setting the brightness is correct but the resolution is not. |
Appreciate
1
Bilbofraggins284.00 |
08-31-2020, 06:06 AM | #146 | |
Captain
284
Rep 912
Posts |
Quote:
Which canbus setting do you use? I see on some videos, the I drive knob moves around normally on the Android side, mine does not touch only? Update.... Backed the vehicle out of the driveway... I drive was dull... couldn’t change brightness either... Also had a high battery drain warning which was expected.... Not sure what’s going on... Perhaps a scan with the Foxwell is in order once I run the Aux cable Last edited by Bilbofraggins; 08-31-2020 at 10:37 AM.. |
|
Appreciate
0
|
08-31-2020, 09:47 AM | #147 |
Captain
284
Rep 912
Posts |
Hooked-up an Aux Cable... That quickly permitted ZLink pairing.... said something about Bluetooth couldn’t be used when when CarPlay used... Anyway Zlink carplay working on the screen... still no sound from the unit... And still getting an onscreen “ No Signal” message staying on after shutdown...
Connections checked.... I think I have hit a wall... |
Appreciate
0
|
08-31-2020, 10:59 AM | #148 | |
Private
34
Rep 57
Posts |
Quote:
|
|
Appreciate
1
Bilbofraggins284.00 |
08-31-2020, 11:02 AM | #149 | |
Private
34
Rep 57
Posts |
Quote:
i wonder if you can test if the unit is sending audio by plugging the aux cord into a speaker rather than the car's port? |
|
Appreciate
0
|
08-31-2020, 11:13 AM | #150 | ||
Enlisted Member
9
Rep 33
Posts |
Quote:
1. Go to idrive mode by pressing the menu button or smth 2. Go to audio source and chose AUX 3. Click on the aux mode and set your volume by clicking on it. 4. When it turns red and shows the volume scale Press on the touchscreen to jump to android. Note - donot exit out of the red vol scale using the click wheel etc like u normally would 6. Test playing smth on android or CarPlay If anyone else has a better solution pls tell me as well. Tats how I get my volume to work on the Android each time the sound input changes to radio or Bluetooth etc |
||
Appreciate
0
|
08-31-2020, 03:00 PM | #151 |
Captain
284
Rep 912
Posts |
Thanks for that... had the phone paired for a short while with wireless CarPlay but it dropped after a few mins....but when set to aux I do have sound now after trying your suggestion...
For the life of me... can’t get back into CarPlay... I drive knob does not work on android side. Unit does not shut off... or accept changes such as ID 6 to 7 without pulling power on head unit... |
Appreciate
0
|
08-31-2020, 03:03 PM | #152 |
Captain
284
Rep 912
Posts |
How do you properly pair IPhone to head unit...
Stop it linking up via Bluetooth... meaning disconnect BMW1234 -and try ZLink...or leave BMW1234 etc connected... either way... ZLink seems to sit at “waiting”... Back to displaying No Signal after shutdown period... Could someone with an E70/71... mines a 13 post their selected settings...please... Appreciated... |
Appreciate
0
|
08-31-2020, 03:42 PM | #153 |
Enlisted Member
9
Rep 33
Posts |
I drive knob does not work on android side
- Don't know this one. 90% of the time I use the touch screen for Android. So not fully sure if mine is working now. I will try it and let you know if mine indeed works. Vaguely, recall it was working at the very start. Unit does not shut off... or accept changes such as ID 6 to 7 without pulling power on head unit... - You mean even after Car is switched off and all the dash lights switch off, the unit is still on? First Press on the power button engine switches off and by the 2nd or 3rd press usually the unit switches off. So not sure how this is happening. Back to displaying No Signal after shutdown period... - Sorry do not know as well. How do you properly pair IPhone to head unit... - This was my worst nightmare for 2 weeks (documented here in this forum). Still not sure why it works now. How it works now is when the car starts, the andoid bluetooth automatically looks for my phone and connects with it and immediately launches Zlink 75% of the time. Other times I have to go and click on it to start and it works. I am sure you have done the following but just to repeat them: 1. Make sure you use the Phone hotspot to activate Zlink. Again dunno if it helps but no harm. 2. In the settings I think you need to make your Android Bluetooth as the master. Not the Car/OEM Bluetooth. 3. Just out of frustration I deleted my Phone from the idrive Blutooth so that it will never look for it. I also deleted the BMW profile from my iPhone Blutooth settings. So that my phone will also not look for the car. 4. After Step 3 - I connected my phone to the Android Bluetooth. Just to make sure the Android and the phone connect with each other. 5. This message: Bluetooth couldn't be used when when CarPlay used - is standard and true. I still get this message for 3 seconds or so. It use to annoy me as I thought that was the error. 6. After a week at least of trying many many times, it started working only in the mornings or after a long switch off period like overnight. But once I get out of the car, it will not connect again for the rest of the day. 7. After another week. it started working all the time. Good luck. |
Appreciate
0
|
08-31-2020, 06:39 PM | #154 |
Captain
284
Rep 912
Posts |
Thanks for the info...
Deleted all my BMW iPhone stuff... as I have no idea how I actually connected to ZLink/ CarPlay first time around... But switching to android BT then trying to connect... nothing happens except the head unit just stuck on connecting... Still there even after shutdown...rolling along... So I pulled the plug on the head unit for this evening... Tomorrow, the plan is to try the different Canbus setting... As nothing seems to happen just changing them... I’m going to select then pull the power and reconnect - as I don’t see how to restart otherwise. That’s the only way I can get it to change from ID 6 to 7... Just my luck.... |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|