After the purchase, I got a post-purchase inspection done (although I had expected it to be much more detailed but it was very high-level) and one of the things reported bad were Front Thrust Arms.
Front suspension has had a clunk noise since day one and it's probably caused by one of the three; Front Thrust Arms, Lower Control Arm or Upper Control Arm. Since it was mentioned in the inspection, I wanted to replace these first - I had also bought sway bar end links but I didn't have a 18mm spanner, so skipped it for now. Lol
FL
FR
FR
FL removed
FR
FL
Service manual calls for replacing all bolts and nuts. They are self locking.
Torqued under load
18mm bolt on the bushing side was torqued down to 100nm + 90 degrees.
27mm ball joint nut was torqued down to 80nm.