Here's my the latest stance with Dinan springs, 21" OEM 310, 20mm Rear Spacers, 12mm Front Spacers, new tires. I think the drop is around 9/16" to 5/8", so very subtle for the effort. But on the road it doesn't look too low (if there is such a thing), just a nice oem-ish stance, IMO.
FWIW, I used the spreadsheet below to calculate gaps, spacers, bolt lengths, etc. It's based on a straight edge touching the lower tire, aligned to center cap, touching upper tire and then observing where the edge sits relative to the fender edge. Actual measurements show it pretty close within a few mm. Buying a spacer fitment kit is the more direct approach, but was too much real work for me, lol. LMK if you see any errors...
