[Travis1807]

Below are my future plans for the truck and the majority should happen within the next month or so.

Loose Cannon Customs

1. Install Hood
1.1. Original Hood lock and shocks
1.2. Hood Pins
1.3. Clear Coat Carbon Fiber

2. Front and Rear Reflectors:
2.1. Paint to Match Body Color (Silverstone 2)

3. Paint Side Markers:
3.1. Gloss Black Body & Clear Lens
3.2. Silverstone 2 & Dark Tint on Lens

4. Paint Emblems
4.1. X5 & M Emblems Gloss
4.2. BMW Roundels Tint Like Tail Lights

5. Tint Tail lights

6. Install Radar Detector w/ Hardwiring
6.1. Not sure where to install “Mute Button”

7. Paint Work
7.1. Remove Front license Plate and Fill in Holes
7.2. Fix scratch on Rear Hatch by BMW Emblem
7.3. Fix Scratch on Front/Driver Side: Bumper/Fender/Quarter Panel

Gets Handled on Next Visit

1. Fabricate Dual Gauge Pod in “A” Pillar Boost and Air Fuel
2. Powder Coat Brake Calibers
3. Sub Box and Amp Rack in Cargo Area

PP-Performance

1. Install Ultimate Racing Downpipes will be here thur.
1.1. Install Exhaust Wrap

2. Install Turbo Blankets

3. Tune

Speed Force Racing

Need custom exhaust fabricated with SS 3” tubing. Cut off stock muffler and replace with resonators, SS 3” tubing and new tips.

Powder Coating

1. Exhaust Tips Need Powder Coating (Matte Black)

2. OEM Brake Calibers (fluorescent yellow/green)

NEED TO STILL BUY/DO

1. BREMBO BRAKES
1.1. CROSS DRILLED ROTORS
2. KW V3 COILOVERS
3. Air/Fuel Sensor already have AEM gauge
4. Boost Sensor for AEM gauge
5. Rear Badges (M, X5,BMW Roundel)
6. Front BMW Roundel Badge
7. Pedal Haus Pedal Set (M Series Anodized Black)
8. 1 more catchcan
9. -10 AN tubing for dual catch can setup

So here are a few pictures of some of the stuff I already have and am just waiting to put on. I will probably end up getting the exhaust done next week. If I don't have time to take the truck to PP-Performance for a tune and to get downpipes installed it will have to wait till after the weekend. PP-Performance is claiming 718 hp with their tune and the mods that I will have completed by the time I take it in for the tune. They are going to dyno the truck before and after the tune so I will post the results after I get it done.

The exhaust I'm having fabricated will look something like this eisenmann exhaust.