Quote:
Originally Posted by DuSh
OP when you'll be putting them back - will you need new gaskets?
Also, to put back oil and cooler lines - is it just torquing them down again and nothing else is needed? Will you buy new clamps for ones you cut?
|
Good Questions.
1) No one makes replacement wastegate arms/valves for the S63 Turbos. Turbo Lab America has been working with another company and my turbos to prototype a wastegate arm fix. They said it would take another month, which I don't have so Austin is going to fabricate a fix using a S63TU Arm and a different valve since it will fit. I should have them next week and be able to start the install the following weekend.
2) I looked up and ordered all the possible gaskets/O-rings that I will need on realoem.com and also ordered some extra bolts in case I loose a couple in the process. I will have a list when I complete the install DIY.
3) I have replacement crush washers for the oil lines and plan on simply hand torqueing the difficult to reach ones. There are a few companies that make special tiny torque wrenches, but the cost is significant.
4) Several hoses will require new clamps. I plan on using generic hose clamps that I already have on hand to replace them instead of the stock style clamps.
__________________
2020 G01 X3 30e
CURRENT M Sport Package
2019 Ford Raptor SuperCrew
CURRENT 802A, KN Drop-in, RB Flaps, Husky Well Liners
2012 E70 X5M
SOLD Stg 1+ Turbos, DPs, Velos Stg 2+, JB4, Race Cats, Bavauto Coils
2003 E46 M3
SOLD aFe CAI, AP Axleback, SSK, H&R Springs, TMS CMBR Arms, PF RTABs