Here is what I'm thinking for a dual catch can system using Mishimotos:
Fittings:
https://www.amazon.com/Anderson-Meta...22%2BBarb&th=1
Heater hose:
http://www.hps-siliconehoses.com/hps...15mm-16mm.html
Two catch cans:
https://www.amazon.com/Mishimoto-MMB.../dp/B00OBEP51K
I just replaced my CCV lines, so I can use the old ones for the connections to the car, and pull these off if I sell the car down the road.
The big problem is the mounting. There is no good location on the passenger side, due to the + power port. I'm thinking about mounting it to the cross connection by using the bolt that holds the upper part of the cross connection to the car, because it will have to come off when I take out the intake pipe anyway. I'll just make an aluminum mount that I weld to the catch can mount. It might have to be slightly angled, and the hoses will have to point down.