|
Brake pedal slowly sinks after new front pads.
Akebono fronts, fluid recently changed, nice hard pedal before.
Brakes were worn to the pad trigger. I C-clamped the pistons to compress them and I didn't open the master cylinder cap (none of the vids I watched mentioned it)
Now brakes are spongy, pedal will sink if held (slowly). When driving I can pump the brakes and they get harder but stopping power is reduced...I can still stop, and the brakes feel hard but I have to stand on them to stop.
Bled the brakes, clean fluid and no bubbles seen.
Did I mess up my master cylinder when I compressed the piston?
__________________
06 330i 6mt Spt- Eibach Springs, BMW Perf Susp, Supersprint Exhaust, BSW Audio
RIP-94 325i 5mt 4d- M3 springs/susp, Z3 wheels, Chipped, Intake, Exhaust= FUN!
|