|
Hi,
Have you managed to retrofit your cruise control?
I've retrofitted cruise control to X5 E70 (got SZL from other X5) and after coding it does not work.
I've added $544 to CAS and FRM and coded (SD_Coderien with blank FSW_PSW.MAN file) all modules, then calibrated steering sensor, but CC is not working. No error messages on dash and car works fine, but CC stalk is in 'look only' mode.
When connected INPA it shows 6E0F DCC: Fehler in Interface zun Kombi-Instrument --- (DSC: Instrumentenkombination Schnittstelle), ISTA+ says DSC: Instrument cluster, interface.
Cannot think what else needs to be done?
Some ppl says on E90 forum that Car accessories in DME needs to be reset, but INPA menu is different with N57 engine and cannot find this reset option.
|