Quote:
Originally Posted by motex
Not right, sorry.
It is an easy 5 minutes job. I did it when we installed the carbon like rood top.
The black end of each rail is kind of a cover for the screws, the way to remove those black plastic ends is to carefully place a very thin plain screwdriver covered with some thin cloth in order not to scratch the paint, do little movements from the bottom doing with just enough preasure to pop it up, then you have to slide each cover backwards, be carefull sliding and not pulling up because you can brake the small plastic guides.
Sorry for my bad english, hope I made myself clear enough
|
Gorgeous
OK when you slide the cover & take them off .. The holes will be open?
you will need to close the open holes .. do i need to buy that parts to close the holes ?