Quote:
Originally Posted by do_0b
im totally new with this...can i put the hub centric rings on my spacers? or do they go on first and then the spacers?
|
Take the rear wheel off... clean any rust... if your spacers are 74.1...put some anti seize on the raised lip of the hub...push on the 72.56 to 74.1 hub centric ring. put the spacer on over the ring...Add some more anti seize on the lip of the spacer...Bolt on the wheel.
If your spacers are 72.56... they will go on first... then the 72.56 to 74.1 ring.. then the wheel...I expect this will be you...
If the spacers are the same size bore both sides and the new wheel is the same center bore, then obviously no hub centric ring needed. Unlikely to be your situation with respect to your rear fitment.