Quote:
Originally Posted by argento
Been offline lately, finally spent some time installing the spacers. I only installed the rears b/c they were needed, but I felt I didn't need to do the fronts...just yet...I'll reassess F/R spacers after the dinan suspension is installed.
In case someone is wondering what was involved...
PARTS: Pair H&R 15mm Spacers for X5M Rear 72.56 Hub (3075725SW, DR Series) w/Qty.10 H&R Extended Conical Seat Lug Bolts (14x1.25x43mm) (14254301SWJ) (The bolt heads on these now look identical to the oem lug bolt, not like the image on the vendor website)
TOOLS: Impact Wrench (IR 2235TiMax) and 17mm Impact Socket, or 1/2" Breaker Bar and 17mm Socket, 1/2" Torque Wrench (140Nm), magnetic pickup, wheel chocks, Jack (AC Hydraulics DK20)
CONSUMABLES: anti-seize, degreaser, rubber gloves, wash station to clean wheels, optima no-rinse to wipe down calipers
Lifting Points: https://www.newtis.info/tisv2/a/en/e...-away/1M86TlIK
Some images....
Attachment 1883981
Attachment 1883982
Attachment 1883983
Attachment 1883984
Attachment 1883985
Next items: exhaust tips, dinan suspension |
Looks great, don't forget to install F10 M5 comp bump stops all around with the dinan springs.