Quote:
Originally Posted by Dunzzy
Fraud it's not easy as they are bolted from underneath which means that you need to remove the headlining. There is some guides on how to do this if you look hard enough on the web but it does not look a straight forward task.
Sorry for the bad news
|
Not right, sorry.
It is an easy 5 minutes job. I did it when we installed the carbon like rood top.
The black end of each rail is kind of a cover for the screws, the way to remove those black plastic ends is to carefully place a very thin plain screwdriver covered with some thin cloth in order not to scratch the paint, do little movements from the bottom doing with just enough preasure to pop it up, then you have to slide each cover backwards, be carefull sliding and not pulling up because you can brake the small plastic guides.
Sorry for my bad english, hope I made myself clear enough