Quote:
Originally Posted by GMWNashville
You can put them back in you just need to turn the motor over to a point where the cam puts as little tension as you can on that rocker and use a pick. It's a pain in the ass and you need to be careful but it can be done. Interesting that it tossed one out on its own though-I've only seen that happen during reassembly for repairs that they come out...
|
I already put it back on but before I start it up, I will first change the oil from 10w40 (euro formula) back to 5w30. I'm wondering if the thicker oil was the cause for the lash adjuster to freeze up, hence the rocker arm falling off. I inspected the spring and all looks fine, nothing broken. I'm also hoping and praying to god it's not a bent valve. Any case, wish me luck..