|
I was able to get my vrsf ones done with some finessing... the drivers side gave me more headaches. I used two big prybars to pull/push at the same time and removed all of the heatshields... you don't need them anymore if you wrap them. I also got a ptp blanket and got rid of the top heat shield as well. I had bolts welded into the bottom flange to help them drop in to the exhaust brace lined up. Lastly, once you have the bottom bolted up almost tight, take the exhaust off the hangers again and that should give you some more space to move the downpipes around.
|