Quote:
Originally Posted by scschafe
Quote:
Originally Posted by gitee
I replaced it myself. I can't remember exactly how long it took, about 1-2 hours. The wiring harness underneath the intake manifold is slightly tricky to re-attach. Oh, and make sure you have long Allen sockets, I think 5mm or 6mm. You'll need it to access the bolt sandwiched between the pump and cylinder head.
|
Do you have to take the intake manifold off or can it be done from underneath? All of the write-ups that I have found seem to be for a diesel so I am assuming that doesn't apply. |
I don't recall having to completely remove the intake manifold. I think I loosened it to gain a little more room. I did remove the throttle body though.
https://www.newtis.info/tisv2/a/en/e...nit/1VnYhbsG7T