Quote:
Originally Posted by Dawgz
Nice, I just went thru installing my dash cam and radar detector hard wiring. That was interesting, to find good 12v leads that were hot with ignition only.
|
Just wired up the mirror tap, took longer than expected ..like 15 minutes. On my '13 LCI I was getting FULL power with the instructions I found on the forum (Think it was from a 2010 E70). So fiddling around I ended up using the BROWN and GREEN/WHITE wires. I should have taken a picture to confirm
. Now when I start the car, it powers up and when I cut the ignition off it powers off. It does NOT stay on if I have it what i call radio mode lol (engine off radio playing).
I HIGHLY suggest a volt meter (the proper way), but I did not use one.
You can also use TIS for the wiring stuff...
https://www.newtis.info/tisv2/a/en/