View Single Post
      06-24-2020, 01:42 PM   #83
Aferanova
Private
34
Rep
57
Posts

Drives: 2013 BMW X6 xDrive50i
Join Date: Jan 2015
Location: Cincinnati, OH

iTrader: (0)

Quote:
Originally Posted by subbu001 View Post
An update from my end.

1. Thank you guys for posting the AUX Cable routing instructions. This is very helpful. Can I ask jvirgi to post pictures / drawings as well if possible. I plan to go via the Pax Side and go through the Shifter Console. Want to see which existing hole in the shifter console he used and also where did he drill to go into the center console.
Good idea running the USBs there, itll be tighter, but i think you should be able to. Youll need a bigger hole to bring them through into armrest box.

Good news on the DHL #, hope you get an origination scan soon. It took mine a few days. i actually had an unrelated package coming DHL from china shipped today and i was quoted 7/6 delivery. If i were you i'd wait it out and if nothing happens you can always dispute the charge with aliexpress or your credit card.

Sorry for the delay, i just got around to taking pictures. Here's how i routed the aux Line.
Side View - Near the footwell, you can drop the aux line through the sidepanel (there are openings) in the back there with all the wiring. once pushing it through an opening i pulled it through to then route behind the carpet panels.
https://photos.app.goo.gl/ZwQGCDj8Tyx7Jgii9

From Side Trim to Center Console - there are openings behind the carpent panels that lead into the center console area, but it routes this way:
https://photos.app.goo.gl/4oFNG6N8eaPEtNgEA

Entering the Center Console:
https://photos.app.goo.gl/ZBywPDA5BbqeDMNQ8

Above Center Console and into armrest - the aux comes up underneath and I was to pull it up through. i drilled the hole from the armrest to the shifter area along the dotted line. But just drilled only as far as to create a hole in the armrest box to slide the aux into.
https://photos.app.goo.gl/QN6GdBgsEkp9opvLA

Inside Armrest - Here you can see the hole i brought it through. There was already a wide cutout here where the snap in phone locks into (i removed mine completely prior to this), so there was already a cutout. I just drilled one hole straight back which widened some of this section.
https://photos.app.goo.gl/hSv7oEa6i9K48DYx9

Last edited by Aferanova; 06-24-2020 at 01:49 PM..
Appreciate 3