|
And here will post couple of pictures of how i did this..
Since i am posting this from my phone, i cant see order of pictures, so sorry fot that.
On one of pictures you see ruber hose i used for wiring. On other photo, you see under the hood-release handle, there us FRM so you have to bypass that by slightliy pulling it out (2 plastic screws, up and down).
Again, in third photo you see how door look like when door panel is removed, you have to slice through this foam for cables to come out.
And last photo is to see how transparent is this, and where i drilled the hole for optic. I saw some people doing the hole line, without drilling anything, but i did not like that, so this i my way of doing it.
Couple of extra photos showing the set before installment
|