Quote:
Originally Posted by boneca
good info here!
I will probably replace my internal LED lights again, I've done it once before few years ago but used aftermarket lights and most of them are flickering now.
|
I also did the reverse lights. I bought a new set of CREE R4XP-E and one always set off the light malfunction error, but both worked just fine. I bought an unknown set from a user here that claimed no errors and installed those. First install I hit an error, but I then added dielectric grease to both and no errors. If someone wants the CREEs I'll send them to you free (conus).
Quote:
Originally Posted by 9vapors
I did the same lights and door projectors... the ones in the back seats are a bear... I cursed a lot while removing those.
|
Yes, first try was awful. Using the pick made a huge difference, out in seconds.