Quote:
Originally Posted by nbhms
I have searched various BMW forums, and found similar issues, but couldn't find any that sounded exactly like my issue, so posting here, hopefully someone has some ideas.
- Doors won't lock or unlock by touching the handle or pulling the handle. Same for all doors and both keyfobs in range. Was working fine, then suddenly quit a couple days ago, for both keyfobs.
- Doors will lock and unlock from keyfob buttons on both keyfobs.
- Replaced keyfob battery on one keyfob to elliminate that issue.
- When unlocking from keyfob, the "find your way" lights in all doorhandles activate, so they have power.
- No handles are warm (issue I've seen posted regarding a short in the handles).
- Push button start works without keyfob inserted in dash, so at least *part* of comfort access is working.
- Checked fuses, they were all good. I think I checked all the relevant ones, but there's a chance I missed one.
Other notes:
There are two error codes I can see in ProTool, they won't go away when I clear them, not sure if they are related:
DME/DDE | 2E3D: Interface EWS-DDE
CAS | A103: Immobilizer bus fault
Anyone have any similar experience or ideas on what's going on?
Is there setting(s) in ProTool to enable/disable the "touch doorhandle" part of the comfort access that I could check? |
Any updates on this? I have the exact same codes.