Quote:
Originally Posted by msp2three35i
great DYI, thank you.
i have the passenger side done, however i overtorqued the bolt that goes through the bushing on the drivers side. I just got a new torque wrench and i was reading the measurements wrong. now the bolt just spins freely in both directions neither tightening or loosening. not sure what to do, any advice would be appreciated. thanks.
|
I'm having the same problem. I had no choice but to leave it. There was no play in the bushing end so I just put the wheel back on and went on my way. If the bolt can't be taken out since it just spins in place I can't imagine it coming loose either because I tried everything.