Looking good, can't wait to see it with the new rotors.
Btw adjusting the rear height couldn't be easier, no need to pay someone. Make sure the car is off. Just lay behind your rear wheel and look at the suspension arms. You will see the height adjuster right there bolted to the arm and sensor. Unbolt only the bottom part, adjust the height, and re install. Make sure you do the same amount of turns on each side. Based on your pic two turns might be enough. You don't need to jack up the car and the car won't collapse on you. You are simply adjusting the height of the air spring height sensor so when you turn the car back on it will lower the car. You can actually watch it lower the rear after you do this.
Here is a pic of the adjusters before install. They are in the bag in the center:
The front is super easy as well, but does require wheel removal.