XBimmers.com | BMW X6 Forum X5 Forum
 
TireRack





Go Back   XBimmers.com | BMW X6 Forum X5 Forum > BMW X6 Forums > General BMW X6 and X6M Forum

Post Reply
 
Thread Tools Search this Thread
      02-27-2012, 03:25 PM   #23
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

Hi Evanevery,
I checked with BMW (not the dealer) and you are correct. Building starts 1st week of April. In March they will begin the re-tooling. My build number does not take in the add vehicle section on the BMW site, does yours?
Appreciate 0
      02-27-2012, 06:07 PM   #24
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

The customer tracking system ("Add Vehicle") will not accept my production number either...

My dealer has sent me a snapshot of their internal tracking tools and it shows my vehicle at a production status of "111". They believe it will not be "customer trackable" until it hits status "112" (Scheduled for Production). They expect it to hit "112" a couple of weeks before it actually starts getting built. Based on that info, I'm not expecting my vehicle to be trackable until the middle to end of March...

I check EVERY morning - anyway...
Appreciate 0
      02-28-2012, 10:34 AM   #25
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

OK Thanks,
I will let you know when my status goes active. My build is also 111.
Appreciate 0
      02-28-2012, 10:41 AM   #26
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

I also have three links set up at www.trackengine.com (for BMW home page, X6m Product Page, and X6m Build page) to be checked daily for any web site changes.

TrackEngine will check these pages once a day and send me an email if anything changes on them. Particularly, I want to know when the "2012" on the build pages changes to "2013" as that will indicate public notice of the pricing/option changes and availability. When that happens, we should be fairly close...
Appreciate 0
      03-30-2012, 11:56 AM   #27
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

Hi Evanevery,

Just called BMW USA at 1-800-831-1117 and gave them my build number, yet I still dont have a scheduled build date. Have you tried calling BMW?

Cheers,
Appreciate 0
      03-30-2012, 03:13 PM   #28
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

I've actually had my build number (production number) since early February. Unfortunately, it is still not coming up under the MYBMW website to check progress.

I understand that it will not likely go live until the line is actually producing the 2013's. So I'm expecting to see something in the next week or so...

However, my dealer did contact BMW to try and get more info (particularly since I have to fly down to do a Performance Delivery in SC) and we were told that they will be building 35 vehicles in April, Mine is number 7 (of 35) and it will be built sometime during the week of 23 April. I got this info about 3 weeks ago. I'm going to check back in with my salesperson next week as we enter the month of April...

Thanks for keeping me in mind!
Ed
Appreciate 0
      03-30-2012, 04:20 PM   #29
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

Wow, 7 of 35 that is great. I will see if I am slated for an April build.
Cheers,
Lucabratsi
Appreciate 0
      03-30-2012, 05:27 PM   #30
doug_999
Major
doug_999's Avatar
12
Rep
1,088
Posts

 
Drives: 2014 650xi GC/2011 1M
Join Date: Mar 2008
Location: Chicago, IL

iTrader: (0)

Quote:
Originally Posted by evanevery View Post
I've actually had my build number (production number) since early February. Unfortunately, it is still not coming up under the MYBMW website to check progress.

I understand that it will not likely go live until the line is actually producing the 2013's. So I'm expecting to see something in the next week or so...

However, my dealer did contact BMW to try and get more info (particularly since I have to fly down to do a Performance Delivery in SC) and we were told that they will be building 35 vehicles in April, Mine is number 7 (of 35) and it will be built sometime during the week of 23 April. I got this info about 3 weeks ago. I'm going to check back in with my salesperson next week as we enter the month of April...

Thanks for keeping me in mind!
Ed
Ed
I mean this in the nicest way (I swear)....
Are you sure you want one of the first couple vehicles produced? I've toured that line twice now (it is amazing) but each and every time I tour it I think "How long did it take them to get it right?". Granted, there are not major changes (like going to a new trans or something), but any chance your dealer could push it back just a bit (or you can wait?). If you have PDC scheduled, then this probably is not possible - just curious.
__________________
2014 650xi GC, Imola Red/Black. MsportEd, CWP, B&O, 20" wheels
2011 1M, Black loaded sans sat radio
Appreciate 0
      03-31-2012, 09:11 AM   #31
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

I'm sure!
Appreciate 0
      03-31-2012, 08:57 PM   #32
djosephs
Enlisted Member
0
Rep
33
Posts

 
Drives: X5
Join Date: Jan 2012
Location: US

iTrader: (0)

I have a 2012 X6M that I took delivery of early Jan. 2012. A great vehicle!

My two cents/opinion:

Standard rims/tires are fine at purchase and then upgrade to bigger wheels. I got the 215 ferric grey - goes great with my space gray color. I am going to put Continentals on the original rims for snows.

The side view cameras are awesome! At least I really like them. The top down view they provide is great for parallel parking.

Dave
Appreciate 0
      04-01-2012, 09:10 AM   #33
doug_999
Major
doug_999's Avatar
12
Rep
1,088
Posts

 
Drives: 2014 650xi GC/2011 1M
Join Date: Mar 2008
Location: Chicago, IL

iTrader: (0)

Quote:
Originally Posted by djosephs View Post

The side view cameras are awesome! At least I really like them. The top down view they provide is great for parallel parking.

Dave
The side view cameras are the ones that are up in front of the front wheels. They are used to activate a side view camera that allows you to see left/right when pulling out of a garage (at least per BMW - in the real world, I can't seem to find any use for them). On the 2012 X6M they are a $300 stand alone option. On the 2012 X6 50/35 they are part of the Tech Package.

I believe you are talking about the rear view camera with top view where two cameras located in the mirrors point down along with the camera on the hatch to give what appears to be a top down view. Not only very cool, but very useful.
__________________
2014 650xi GC, Imola Red/Black. MsportEd, CWP, B&O, 20" wheels
2011 1M, Black loaded sans sat radio
Appreciate 0
      04-01-2012, 03:26 PM   #34
AndreyATC
The Rocket
AndreyATC's Avatar
United_States
21
Rep
1,538
Posts

 
Drives: 2012 X6M
Join Date: Oct 2006
Location: Near NYC

iTrader: (2)

Garage List
I got side view cams
Useful in cases when you pulling out of narrow driveway, e.g. between houses, or from stop sign on narrow street with lots of cars in parallel parking
Common case in NYC, i use them quite frequently
__________________
2012 X6M AW/Silverstone II Full Leather/Driver Assistance/HUD/Active ventilated seat/Rear Climate/Cold Weather/Premium Sound/BMW Apps/Soft Close/Side-top-rear Cams/Comfort Seats/3 Seats/Keyless
Appreciate 0
      04-01-2012, 03:56 PM   #35
djosephs
Enlisted Member
0
Rep
33
Posts

 
Drives: X5
Join Date: Jan 2012
Location: US

iTrader: (0)

Doug - I stand corrected! The side view cams are different than the top down ones underneath the side view mirrors. I thought that you needed to buy the side view cams to get the top down ones under the side view mirrors. I guess I am mistaken about that.
Appreciate 0
      04-03-2012, 04:23 PM   #36
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

Just an update for anyone who has a 2013 X on order...

The vehicles are being built this month. In looking at the information I have been provided so far, it appears that PRODUCTION will be rolling by the third week of April.

However...

In communication with the PDC, it appears that they have an EPA/CARB hold for the 2013 X model year. The hold has to be cleared before they can DELIVER the vehicles. (My delivery will be through the PDC, but they have the same restrictions as dealers). So while its nice that they will actually be PRODUCING the vehicles pretty soon, the question becomes how long they will have to sit around before they can be DELIVERED to customers. I'm trying to get more info on whether they have to go through this every model year, how long it typically takes to get EPA/CARB approval, and if anything special is going on this year which could be slowing down the approval process.

Hopefully, this is nothing...

However, I wonder if family visits are permitted if my newborn car has to be put in EPA/CARB Jail for a while!
Appreciate 0
      04-04-2012, 11:22 AM   #37
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

Th PDC confirms a post Production EPA/CARB delivery delay on the 2013 X vehicles. They also say that this is nothing special, just the typical approval they must wait for each new model year vehicle. They also indicate that they have no control over how long it takes for the federal approval. It can take anywhere from 2-6 weeks (following the production of the first new model year vehicle).

With production starting mid-April, that would imply the very first deliveries sometime during the month of May.
Appreciate 0
      04-10-2012, 09:36 AM   #38
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

Hello,
Just confirmed my X6M is in Production as of 4/9 with a completion date of 4/19. I asked BMW about the EPA/Carb issue and was told it only applied to the M3/M5 regarding MPG ratings.
Appreciate 0
      04-10-2012, 10:06 AM   #39
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

It looks like you are a couple of weeks ahead of me. Good for you!

Is your vehicle addable under the MyBMW site? I still can't add mine to track it...
Appreciate 0
      04-10-2012, 03:02 PM   #40
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

Hello,
No, my build number still does not work on the BMW site. I asked about this, and was told it may work in a few days, but also may not. So somewhat dissapointing. However BMW in Ohio is very helpful, and they said call anytime if I want the status.
Cheers,
Appreciate 0
      04-16-2012, 09:32 AM   #41
evanevery
Private First Class
6
Rep
142
Posts

 
Drives: 2013 X6M & 2013 M6 Convertible
Join Date: Feb 2012
Location: Wisconsin

iTrader: (0)

Quote:
Originally Posted by Lucabratsi View Post
Hello,
Just confirmed my X6M is in Production as of 4/9 with a completion date of 4/19. I asked BMW about the EPA/Carb issue and was told it only applied to the M3/M5 regarding MPG ratings.
Hows your build coming? Is it trackable yet? Do you have a delivery date?
Appreciate 0
      04-16-2012, 06:48 PM   #42
Lucabratsi
Private
2
Rep
64
Posts

 
Drives: 2013 X6M
Join Date: Feb 2012
Location: NJ

iTrader: (0)

Still can't track, and i was told i probably won't be able to track. That stinks. I will let you know when i get some updates, which i can get by calling BMW.
Appreciate 0
      04-16-2012, 07:54 PM   #43
wang490
WTS my car :p
United_States
3
Rep
109
Posts

 
Drives: Mitsubishi Lancer Evolution X
Join Date: Apr 2011
Location: Indiana

iTrader: (0)

Send a message via Skype™ to wang490
My dealer called me today, my 2013 x6m start production on Apirl 5th. Will arrive my dealer showroom next week.... So fast. I just wait a month.
Appreciate 0
      04-16-2012, 11:20 PM   #44
udmx6
Private First Class
United_States
3
Rep
117
Posts

 
Drives: 13 550i
Join Date: Feb 2012
Location: USA

iTrader: (0)

Please contact me when you get your X6M. I will get my X6 in May.

Quote:
Originally Posted by wang490 View Post
My dealer call me today, my x6m start production on Apirl 5th. Will arrive my dealer showroom next week.... So fast. I just wait a month.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:01 PM.




xbimmers
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST