HID Fog Light resistors for error cancellation??!?

robinzon · 12-05-2009, 06:02 PM

Hey all,

I have 6000k Philips (yes all German Ballast and bulbs) HID Kit installed in my FOGs ... I have the capacitor harnesses in place but even with them I get Error Codes when the lights are in AUTO mode (if you turn on and off then fogs on it goes away)... anyone installed these with resisotrs? what worked for you? I installed I believe a 6ohm but that didnt quite do it.

Thanks

robinzon · 12-07-2009, 05:46 PM

Quote:

Originally Posted by dmlgc

I ordered the ones mentioned in this thread from e92 lighting and installed without any problems or error codes:
http://www.xbimmers.com/forums/showthread.php?t=326253

It just seemed like the easiest way to go.

Did you not read my post? I ALREADY have HID lights.... thanks for the effort but this has ZERO to do with my question

E92-Lighting · 12-10-2009, 11:59 AM

all MTEC Hid kits come with capacitors built inside the ballast for error free and no flickering

12-05-2009, 06:02 PM	#1
robinzon New Member 4 Rep 16 Posts Drives: X6 5.0i Monaco Blue Join Date: Aug 2009 Location: NYC iTrader: (0)	HID Fog Light resistors for error cancellation??!? Hey all, I have 6000k Philips (yes all German Ballast and bulbs) HID Kit installed in my FOGs ... I have the capacitor harnesses in place but even with them I get Error Codes when the lights are in AUTO mode (if you turn on and off then fogs on it goes away)... anyone installed these with resisotrs? what worked for you? I installed I believe a 6ohm but that didnt quite do it. Thanks
	Appreciate 0 Tweet Quote

12-10-2009, 11:59 AM	#3
E92-Lighting 860 Rep 35,253 Posts Drives: Next Generation LED Lighting Join Date: May 2008 Location: Walnut iTrader: (324)	all MTEC Hid kits come with capacitors built inside the ballast for error free and no flickering
	Appreciate 0 Quote