|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
12-15-2012, 06:47 PM | #1 |
Private
7
Rep 64
Posts |
Pre-LCI E70 Front Reflector DIY Issue, I can't get my hand in the driver side bumper!
All I see out there are DIYs for LCI E70s...Only one DIY for Pre-LCI's don't have working images (Reference: KEV's Reflector Swap DIY).
I was able to get the passenger side done very easily, but I don't have the same luck with the driver side. Can any of you E70 veterans please guide me as to how I'd be able to secure the new reflector with the radiator/oil cooler in the way? I had followed KEV's instructions to get the 5 8mm screws removed and was able to get the reflector halfway pressed onto the cut out...but as I try to secure the higher portion of the reflector my hand can't reach any higher. Any advice would be appreciated. Thanks in advance!
__________________
03 Jet Black E46 M3 Vert || 08 Alpine White E92 335xi MFest || TheSHOP || STM || Southbay Autohaus || EAS AG Forged || StilundMacht || BavX || Hardware Motorsport || Team Leche |
02-18-2013, 07:15 AM | #3 |
Major
312
Rep 1,041
Posts |
Does anybody know if the reflector itself is the same pre and post LCI?
Thanks
__________________
2024 M2, 2024 CGT4RS, 2020 M2 CS, 2021 Macan GTS, 2017 Cayenne S, 2002 M Coupe |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|