05-02-2017, 05:05 PM | #1 |
Enlisted Member
8
Rep 30
Posts |
5 flash turn signals
I'm using Carly for BMW and trying to code my one touch turn signals to give me 5 flashes vs 3. I've changed the one touch and all the 'key' (1-4) to five flashes and get a successful coding message. However, I don't see the 5 flash option in iDrive (only 1 or 3 flashes).
Thoughts? |
05-02-2017, 05:11 PM | #2 | |
First Lieutenant
76
Rep 378
Posts |
Quote:
|
|
Appreciate
0
|
05-04-2017, 08:57 AM | #5 |
Enlisted Member
8
Rep 30
Posts |
|
Appreciate
0
|
05-04-2017, 09:26 AM | #6 |
Enlisted Member
8
Rep 30
Posts |
Well, I just redid the coding and it worked! Not sure if this was the difference but in iDrive I made no changes as indicated above. Thanks for the tip!
|
Appreciate
0
|
05-04-2017, 09:26 AM | #7 |
Lieutenant
55
Rep 415
Posts |
Don't remember the specifics but I changed mine to 5 flashes in Carly as well. Mine flashes 5 times. Didn't touch any idrive setting. Maybe try it again with Carly by switching it back to 3 and then 5?
|
Appreciate
0
|
05-04-2017, 11:14 PM | #8 |
Captain
164
Rep 906
Posts
Drives: 2008 535xi / 2011 Z4 35Is
Join Date: Jan 2011
Location: Indiana
|
If you touch the I drive setting you will get 3 again because that is the menu option in the display.
Carly is not changing the I drive menu option so it is kinda pointless as soon as you have another adjustment to make such as turning off DRL when working on the car. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|