XBimmers.com | BMW X6 Forum X5 Forum
 
TireRack





Go Back   XBimmers.com | BMW X6 Forum X5 Forum > BMW X6 Forums > General BMW X6 and X6M Forum

Post Reply
 
Thread Tools Search this Thread
      01-27-2016, 09:58 PM   #1
ideliver
Major
ideliver's Avatar
238
Rep
1,247
Posts

Drives: E60 M5, E71 X6M, E46 M3
Join Date: Feb 2008
Location: At the gas station

iTrader: (0)

Garage List
2006 BMW E46 M3 'vert  [0.00]
2008 BMW M5  [0.00]
2011 BMW E92  [0.00]
2012 BMW X6M  [0.00]
2003 E46 M3  [0.00]
Valentine 1 and Savvy (E71 X6M)

I can happily report that the Valentine One and Savvy are working perfectly with my 2012 E71 X6M.

I decided to take a leap of faith and opted to install he Savvy adapter. It plugs into the OBD port and serves as the power source and mutes the V1 below your selected speed. It makes a clean install seamless

I installed the Savvy with the V1 Connection at the top of the footwell. I used 3M loop adhesive and routed the power up the A pillar

The side panel of the dash pries off easily and the A pillar is held in place by one torx screw under the airbag plastic label. The cover is then held by plastic fasteners. Just pull firmly. I contained the cord under the headliner.

Simple as that. 2 of 10 on difficulty.
Attached Images
   
__________________
Current: 2006 E46 M3 'vert 6-sp 2008 E60 M5, 2011 E92 328 6-sp, 2011 E70 N55, 2012 E71 X6M

Appreciate 0
      03-09-2016, 12:06 PM   #2
Rudubb1n
Registered
0
Rep
3
Posts

Drives: 2010 X6
Join Date: Mar 2016
Location: Green Bay Wisconsin

iTrader: (0)

Is it really worth it? i have had a V1 in every car i have owned for the last 15 years. and i have been tapping into the powered mirrors for all of them. with pin style cords so its a no damage tap. takes about 30 min on a new car to figure out with a multi meter. did you run the cords down the headliner and the pillars?
Appreciate 0
      03-09-2016, 07:29 PM   #3
ideliver
Major
ideliver's Avatar
238
Rep
1,247
Posts

Drives: E60 M5, E71 X6M, E46 M3
Join Date: Feb 2008
Location: At the gas station

iTrader: (0)

Garage List
2006 BMW E46 M3 'vert  [0.00]
2008 BMW M5  [0.00]
2011 BMW E92  [0.00]
2012 BMW X6M  [0.00]
2003 E46 M3  [0.00]
It's really simple and it works. No ground issues and will silence your V1 at a preselected speed. Yes, I ran it up the A pillar by removing the trim piece (1 torx screw and a few fasteners) and then hid the cord in the headliner. It's all concealed nicely.

It serves as a power source for the V1 connection or for a remote display (but not both). My motivation for posting was to confirm that it works on an E71. I too have always hard wired my V1's. This is another option.

Is it worth $70? That varies by individual.
__________________
Current: 2006 E46 M3 'vert 6-sp 2008 E60 M5, 2011 E92 328 6-sp, 2011 E70 N55, 2012 E71 X6M

Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:05 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST