01-10-2014, 02:19 AM | #1 |
Private First Class
19
Rep 170
Posts |
Hardwire radar detector
Im interested in hardwiring my radar detector. I was thinking about powering it from the mirror and using a blendmount or something similar in mounting my detector. BTW, be careful when you're removing the plastic housing around the mirror mount as the plastic tabs are easily broken.
Does anybody know which one of these wires I should tap into for power and ground? This is the wiretap im going to be using: |
01-10-2014, 05:11 AM | #2 | |
Captain
36
Rep 846
Posts |
Quote:
|
|
Appreciate
0
|
01-10-2014, 02:36 PM | #3 |
Private First Class
16
Rep 168
Posts |
|
Appreciate
0
|
01-10-2014, 06:45 PM | #4 |
Lieutenant
34
Rep 472
Posts |
OP, your best option is to unplug those cables and test them with a volt meter to determine which is a +12 that is active after powering on the car. On xoutpost, they default to the green and white wire, try that one and see if it works since it is in a different location
|
Appreciate
0
|
01-10-2014, 10:38 PM | #5 |
Enlisted Member
8
Rep 36
Posts |
On my 2012 X5.
From the 10 pins plug: Pin 3 is power. Pin 10 is ground. You can read my thread here: http://www.xbimmers.com/forums/showthread.php?t=927886 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|