02-27-2015, 01:45 PM | #1 |
Lieutenant General
11572
Rep 11,136
Posts |
Cracked coolant expansion tank...
Wife saw a "low coolant" warning when she was out with my son earlier this week, but the light went off. Two days ago, I'm on my way to take my son to the doctor and the low coolant light is on from the second I start the car. I remember Poppyboy saying I could just top it off, so didn't think about it. Not even a few miles from my house and the white smoke starts coming from under the bonnet. Park it on the side of the road, call my (excellent) SA and he tells me to just get it towed to the dealership.
Apparently the coolant expansion tank had cracked, and it blew the vent hose at he same time. Strange thing was that I never received a "car is overheating" warning on my dashboard. The SA thinks that it probably happened right after I shut the car off. CPO took care of everything but the hose and clamp. Apparently, the coolant expansion tanks are a weakness as they are made of plastic, and can start cracking over time. 17127536235 - VENT PIPE 34321156893 - HOSE CLAMP 17137647290 - EXPANSION TANK 82141467704 - COOLANT Picked her up earlier and she drives great as always again! |
02-27-2015, 01:48 PM | #2 |
Major
470
Rep 1,292
Posts |
This is a known issue. Ask any tow truck driver LOL!. Same thing happened to me while I was sitting on a bridge at a border crossing from Canada to USA last summer.
__________________
_____________________________________ 2021 X6M Competition, 2021 Audi SQ5 Technik, 2013 Audi S4 |
Appreciate
0
|
02-27-2015, 02:00 PM | #3 | |
Captain
107
Rep 994
Posts |
Quote:
|
|
Appreciate
0
|
02-27-2015, 02:23 PM | #4 |
New Member
0
Rep 15
Posts |
I think the key issue here is that these Bimmers run on a closed circuit pressurized engine cooling system with no vent. Meaning that any pressure developed by the expansion of hot coolant will be handled by the air gap in the expansion tank. Also note that the Bimmer Expansion Tank doubles as the primary coolant reservoir.
Thus, the tank and other flexible hoses in the cooling line are consistently subjected to cyclic stresses, expanding/contracting, due to pressure from heating/cooling coolant fluid. The Expansion Tank, as it seems, being the least elastic member of the system would likely be the first to fail under extended fatigue condition. Some other car makes/models equally have coolant expansion tanks, albeit as a secondary coolant reservoir, but with a vent tube. Therefore excess pressure build up could be relieved to the outside environment of the fluid reservoir. Many Lexus/Toyota operate on this model. Last edited by Falkon; 03-04-2015 at 06:50 AM.. |
Appreciate
0
|
02-27-2015, 06:44 PM | #5 |
Captain
194
Rep 828
Posts
Drives: 2011 X5 3.5i w/ SA Package
Join Date: Jul 2014
Location: Lincolnshire, IL
|
You freaked me out at the beginning of your post. I thought I gave you bad advice leading to the destruction of your engine!
|
Appreciate
0
|
02-27-2015, 07:05 PM | #6 |
Lieutenant General
11572
Rep 11,136
Posts |
|
Appreciate
0
|
03-04-2015, 12:52 PM | #7 |
Second Lieutenant
34
Rep 295
Posts |
Known/common issue even on the E46/E90...I replaced all expansion tank, water pump (OEM uses plastic impeller) and thermostat...
__________________
E46 330i (Sold)
E90 328i (Sold) E90 325i (Sold) E90 328i xDrive |
Appreciate
0
|
03-06-2015, 10:17 AM | #8 |
Major
1023
Rep 1,168
Posts |
I've read somewhere about a suggestion to replace the expansion tank cap with the one from a diesel version, as it has lower pressure tolerance and helps preventing various coolant leaks, esp. in radiators. Since I have 3.5d I didn't pay much attention, but something for non-diesel owners to consider, I guess...
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|