02-08-2012, 02:49 AM | #1 |
Colonel
341
Rep 2,232
Posts
Drives: Made in Bavaria
Join Date: Oct 2007
Location: On a base somewhere near or afar!
|
X6 35i Exhaust options?
Have a 2010 X6 35i which I recently purchased CPO from my BMW dealership in MD. Got them to throw in a discounted Dinan Stage 1 Performance software at the time of sale and car runs great...good gas mileage. However I am now wondering about options for exhausts upgrades. Prior e92 M3 had an Eissenman Sport which I loved...and know the X6M has probably tons of options out there...but what about the non-M X6's in the 35i and 50i engine variants?
Opinions? Links? Thoughts? All would be greatly appreciated as well as any other must do mods for the car. Have clear side markers waiting to be installed when I get home again.
__________________
'22 BMW M4 Comp (SSG/Black)
'16 BMW M4 (Shakir Orange/Black) - gone not forgotten '15 BMW M3 (Black/Black) - gone not forgotten '10 BMW X5M (Black/Black) - gone not forgotten '08 BMW M3 (Space Gray/Black) - gone not forgotten |
02-08-2012, 02:33 PM | #2 |
2868
Rep 11,374
Posts |
Eisenmann offers a full bolt-on system for the X6 35i (N54 and N55) in dual and quad tip. Enjoy the new X
__________________
|
Appreciate
0
|
02-10-2012, 11:15 PM | #3 |
Colonel
341
Rep 2,232
Posts
Drives: Made in Bavaria
Join Date: Oct 2007
Location: On a base somewhere near or afar!
|
Nate thanks for the info. Is this available? PM me with costs and shipping to 78253. Am out of town now but may be interested in this as my next mod.
__________________
'22 BMW M4 Comp (SSG/Black)
'16 BMW M4 (Shakir Orange/Black) - gone not forgotten '15 BMW M3 (Black/Black) - gone not forgotten '10 BMW X5M (Black/Black) - gone not forgotten '08 BMW M3 (Space Gray/Black) - gone not forgotten |
Appreciate
0
|
02-12-2012, 02:12 PM | #4 |
Colonel
341
Rep 2,232
Posts
Drives: Made in Bavaria
Join Date: Oct 2007
Location: On a base somewhere near or afar!
|
Any info on the Remus X635i option as well. Interested in comparison as the Remus, Eisenmnan and Supersprint seem to be the only options. Would like the dual tips set up but not sure if they will fit the OEM rear valences/openings. Any one with info or experience on this appreciate sharing guidance/wisdom/experiences.
__________________
'22 BMW M4 Comp (SSG/Black)
'16 BMW M4 (Shakir Orange/Black) - gone not forgotten '15 BMW M3 (Black/Black) - gone not forgotten '10 BMW X5M (Black/Black) - gone not forgotten '08 BMW M3 (Space Gray/Black) - gone not forgotten |
Appreciate
0
|
03-21-2012, 10:20 AM | #5 |
New Member
2
Rep 6
Posts |
I did some mods to the existing exhaust on my 2010 35i X6. First, I replaced the valve on the passenger side with a straight though pipe. I could have opened the valve and welded it open but I thought it would still cause some restrictions while there... I also experimented with taking off the resinator.....bad choice, car farted like a little Honda.... put that back on and took off the two last cats.... car sounds really good, no power loss, but not beefy enough sounding. I think I will be changing it all out for the Eissenman single exhaust tip (I like the single look).
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|