01-20-2013, 07:33 PM | #2 | |
Lieutenant
14
Rep 432
Posts |
Quote:
|
|
Appreciate
0
|
01-20-2013, 11:09 PM | #4 |
First Lieutenant
34
Rep 367
Posts |
I did something similar on my 911. A LOT of work. You have to tear them completely down...as the rubber seals will melt during the baking time. Plus they have to be sandblasted and degreased, prior to powder coating. At least I did mine that way. They turned out really great.
__________________
2019 Ram 1500. (Toy hauler)
2009 M3 Vert (Fun in the sun) 2006 330i 6sp manual. (Commuter) 1999 528iT 5sp manual (new addition) |
Appreciate
0
|
01-21-2013, 12:25 AM | #5 |
Private
0
Rep 95
Posts |
As the other poster said. Powder coating is the "right" way to do it but it does take more time to remove all the bits and reassembly. That is why many paint them instead. The results are pretty good if get it done right. Pretty horrible is they don't prep it and use the right temp paint for the calipers. Some shoot a clear on top and place stickers before the clear is shot on them.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|