weisslicht e70 angel eye replacement

[RL67POLO]

Been looking online for a PDF or some type of instructions, has anyone here done them themselves before? how hard is it

[RL67POLO]

bump

[alextclam]

I just installed mine last night. It's not hard just lack of space to work around in. You have to reach in to disconnect and connect the wiring harness with one hand. Took me about 10 mins each side. Probably could've done it in 5 if I had smaller hands hah.

[Jim E.]

Originally Posted by alextclam

I just installed mine last night. It's not hard just lack of space to work around in. You have to reach in to disconnect and connect the wiring harness with one hand. Took me about 10 mins each side. Probably could've done it in 5 if I had smaller hands hah.

Pics?

[alextclam]

It was hard to take good pics but these were the best that came out.

[chinaman01]

will this one fit on the 11 x5?

[alextclam]

Yes, mine is 2011.

[RL67POLO]

alex i was trying again last night and took the bulbs out but theres not enough slack on the wire/ my hands arent small enough to unclip the power part of the bulb... any tips on how ya got that done?? ( ie flat tip screw driver, by hand etc) the working space is crazy small i could barely get my hand in and out

[SV Concepts III]

If it's too tight, you can remove or pull the headlights forward but it's not necessary.

[alextclam]

Yea, everyone suggested to unclip the wire harness from the bulb first but I found it easier to remove the bulb first. So I removed the bulb and held the base of the bulb with one hand using my index finger (same hand) tip to unclip it.

There should be a '+' and '-' on the connector of the Weisslicht harness. The '+' connects to the black wire of the OEM harness. I found out the hard way hah.

[DOMEPEACE]

Where do you by that and how much does it cost, it really looks sick nice job.

[StayRight]

Originally Posted by DOMEPEACE

Where do you by that and how much does it cost, it really looks sick nice job.

Jlevi has them. A guy in the x6 forum got them for 140$, while I was quoted 155$

[DOMEPEACE]

Originally Posted by StayRight

Jlevi has them. A guy in the x6 forum got them for 140$, while I was quoted 155$

Thanks a lot for the information.

[SV Concepts III]

Thanks for the support guys. Give us a call if you need a set, we have them up on our site as well.

[swamyg1]

Can anybody comment on how these might compare to the Lux v2's?

[Kloogy]

These all look good at night. The key is , how do they look during the day ? Most are almost invisible in sunlight.

[eggr]

I installed those in my M6 about a month ago. I liked them but they kept giving me a "light out" code on the dash display. I ended up taking them out because the warning and constant chime drove me nuts. They may have fixed that problem since then.

[RL67POLO]

finished the install tonight, 15 min each light. Def tricky as hell with normal sized hands but thats just BMW's problem with the space given not the product. Lights look good so far no codes or anything as of tonight when I drove around the block. I'll take some pics during the day and let you guys know if any codes throw

Happy new year brothers
RL

[Slalom]

OP

Bimmian has a pdf on installation as well as a video.

[swamyg1]

Would love to see some daytime pics!!!

[RL67POLO]

Will take daytime pics today , its a bit overcast but ill put up sunny day aswell.

[RL67POLO]

So on my way home from the gym the car threw a error. Said left daytime
Running light and a ! , then just before driving it also said it again

if anyone knows is that normal or will it keep comming back? Light still was seated correct and
Running perfect. I reseated the plug just to make sure everything was 1000%