10-20-2019, 12:45 AM | #1 |
New Member
14
Rep 19
Posts |
2011 BMW X5 35i - Remote Starter (idatastart)
Hello all,
I've been running a ADS-BM1 remote car starter on my 2011 BMW X5 35i for over a year now. I have had zero problems and it works great. I wanted to make a thread of my install to help anyone or if anyone is on the fence about purchasing one. First off, the install was super easy. Everything was plug and play. Total time taken (if I would have known everything from the start) would be around 2 hours. I paid around $750 for the remote starter and an included transmitter kit (one 2-way remote and one 1-way remote). You are also able to remote start it by triple clicking the lock button. INSTALL: This PDF shows the install process: oem-idsrs-bm1-ads-bm1-en.pdf Connect all t-harness connectors: Picture of all connections to vehicle: Pictures of antenna install for transmitter kit: Programming keys: One part that is not covered in the video above is the KLON, This is done on a PC computer with internet explorer (special cable needed: approx $50-80). You'll need a username and password, just make one (select that you are an installer). Here is a video that shows how to KLON (start video at 7:02): One part I had difficulty finding information on was how to sync my remotes to my antenna. This is what my remotes and antenna look like: Steps to sync remotes with antenna:
Hopefully this helps someone, Cheers!
__________________
2011 BMW X5 35i || M Performance Package || BMS CAI Sequential LED Rear Bumper Reflectors LED DRL's with Signal Last edited by SpaceGrey_E70; 10-20-2019 at 12:58 AM.. Reason: Video wasn't displaying |
01-08-2024, 01:39 PM | #2 |
Registered
0
Rep 2
Posts |
How do you program the keys if its comfort access keys and wont insert/detect by slot? The Module stays in red never turn green when comfort access keys was inserted. I only have 2 CA keys, I dont have standard key.
|
Appreciate
0
|
01-31-2024, 01:11 AM | #3 | |
New Member
14
Rep 19
Posts |
Quote:
You could try contacting the company for support: www.idatalink.com What page # and step # of the process did you get to? I’m referring to page 5 and 9 steps. I’m guessing that you didn’t complete page 5 steps correctly and are now attempting page 9. Did you flash both the module and the expansion pack at the very beginning? I'm not sure about anyone else but a lot of the information/videos in my original post don't show on the Bimmerpost app, they only show on my computer in a web browser.
__________________
2011 BMW X5 35i || M Performance Package || BMS CAI Sequential LED Rear Bumper Reflectors LED DRL's with Signal |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bm1, flash logic, flashlogic, idatastart, remote car starter, remote starter |
|
|