|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
05-10-2017, 09:42 AM | #1 |
First Lieutenant
170
Rep 327
Posts |
Stud conversion kit for spacer setup - 75mm/82mm , 14 x 1.25
Have a new ECS Tuning stud conversion kit to convert from threads/bolts to studs/lugs on an X for those who are running spacers. This kit consists of 2 ECS Tuning half kits in black and can be used with different size spacers front & rear. 10 x 14 x 1.25 X 75mm studs - can be used w/ spacers upto 15mm 10 x 14 x 1.25 x 82 studs - can be used w/ spacers upto 22mm 20 x open ended nuts The reason for the two different sets is so the stud does not stick out from the wheel too much while running different sized spacers Last edited by Deftronix; 05-19-2017 at 06:17 PM.. |
Post Reply |
Bookmarks |
|
|